Proceedings of the 6th FIRST 2022 International Conference (FIRST-ESCSI 2022).
Saved in:
Superior document: | Atlantis Highlights in Engineering Series ; v.14 |
---|---|
: | |
TeilnehmendeR: | |
Place / Publishing House: | Dordrecht : : Atlantis Press (Zeger Karssen),, 2023. ©2023. |
Year of Publication: | 2023 |
Edition: | 1st ed. |
Language: | English |
Series: | Atlantis Highlights in Engineering Series
|
Online Access: | |
Physical Description: | 1 online resource (555 pages) |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
id |
5007233612 |
---|---|
ctrlnum |
(MiAaPQ)5007233612 (Au-PeEL)EBL7233612 (OCoLC)1385455080 |
collection |
bib_alma |
record_format |
marc |
spelling |
Husni, Nyayu Latifah. Proceedings of the 6th FIRST 2022 International Conference (FIRST-ESCSI 2022). 1st ed. Dordrecht : Atlantis Press (Zeger Karssen), 2023. ©2023. 1 online resource (555 pages) text txt rdacontent computer c rdamedia online resource cr rdacarrier Atlantis Highlights in Engineering Series ; v.14 Intro -- Preface -- Organization -- Contents -- Peer-Review Statements -- 1 Review Procedure -- 2 Quality Criteria -- 3 Key Metrics -- 4 Competing Interests -- Initial Study of Two-Blade Propeller Design Parameter -- 1 Introduction -- 1.1 Definition Terms -- 1.2 Software Based Modeling -- 2 Material and Method -- 2.1 Design Proposed -- 2.2 Formulae Design -- 3 Result and Discussion -- 3.1 Simulation Steps -- 3.2 CAE Analysis -- 4 Conclusion -- References -- The Method of Constant Current - Constant Voltage (CC - CV) for SECA Electric Car Battery Charging with Fuzzy Logic Controller -- 1 Introduction -- 2 Literature Review -- 2.1 Battery Charging -- 2.2 Constant Current-Constant Voltage -- 2.3 Overcharge -- 2.4 Fuzzy Control System -- 3 Equipment Design -- 4 Discussion -- 5 Conclusions -- References -- Design Compression Molding Machine with Hydraulic System -- 1 Introduction -- 2 Methodology -- 3 Result and Discussion -- 4 Result and Discussion -- References -- Manufacture of Food Preservatives from Liquid Smoke as By-Product of Processing Coconut Shells (Cocos Nucifera) -- 1 Introduction -- 2 Methodology -- 3 Result and Discussion -- 3.1 Analysis Pretreatment of Raw Material -- 3.2 Product Quantitative Analysis -- 3.3 Product Qualitative Analysis -- 3.4 Characterizations and Identification of Liquid Smoke Components -- 4 Conclusions -- References -- The Addition of Natural Colour Pigment Brazilin from Sappan Wood Extract (Caesalpinia Sappan Linn) in the Manufacture of Tempeh to Improve Tempeh Product Antioxidant Content -- 1 Introduction -- 1.1 Definition of Sappan Wood -- 1.2 The Content and Benefit of Sappan Wood -- 2 Research Methodology -- 2.1 Research Design -- 2.2 Observation -- 3 Material and Method -- 3.1 Research and Procedure -- 4 Results and Discussions -- 4.1 Analysis of Yield -- 4.2 Analysis of Anthocyanins. 4.3 Analysis of Degree of Acidity (pH) -- 4.4 Tempeh Analysis Before and After Fermentation -- 4.5 Analysis of Antioxidant -- 4.6 Analysis of Water Content -- 4.7 Analysis of Ash Content -- 5 Conclusion -- References -- Producing Liquid Smoke Results from Pyrolysis of Waste Acacia (Acacia Mangum Wild) and Teak Wood (Tectona Grandis) into Organic Pesticides -- 1 Introduction -- 2 Methodology -- 3 Result and Discussion -- 3.1 Analysis Pre-treatment of Raw Material -- 3.2 Analysis of Colour and Odour Analysis of Liquid Smoke -- 3.3 Product Quantitative Analysis -- 3.4 Product Qualitative Analysis -- 3.5 Gas Chromatography-Mass Spectroscopy (GCMS) Analysis -- 4 Conclusions -- References -- Enriching Methane Content from an Anaerobic Digestion Process of Cow Manure -- 1 Introduction -- 2 Materials and Method -- 2.1 Materials -- 2.2 Method -- 3 Results and Discussion -- 4 Conclusion -- References -- Comparative Evaluation of Biofuel Products from EFB (Empty Fruit Bunch) and PKS (Palm Kernel Shell) Based on GC-MS -- 1 Introduction -- 2 Research Method -- 2.1 Thermal Cracking Process -- 2.2 Composition Analysis by GC-MS -- 3 Result and Discussion -- 4 Conclusion -- References -- Separation of Red Palm Oil from Crude Palm Oil Using Ceramic Membrane from Clay and Bentonite -- 1 Introduction -- 2 Research Methods -- 2.1 Materials and Instruments -- 2.2 Procedure -- 3 Results and Dsicussion -- 3.1 Degumming and Neutralization Process of CPO -- 4 Free Fatty Acid Analysis -- 5 Analysis β-Carotene -- References -- Study of the Delignification Process of Kelutuk Banana Stem (Pseudostem of Musa Balbisiana) as Raw Material for Bioethanol Production -- 1 Introduction -- 1.1 Bioetanol -- 1.2 Delignification -- 2 Materials and Methods -- 2.1 Research Materials and Site -- 2.2 Delignification Instrument -- 3 Result and Discussion -- 3.1 Result -- 4 Discussion. 5 Conclusion -- References -- Hydrolysis Reaction Kinetics of Baggasse and Banana Peel in the Process of Bioethanol Production -- 1 Introduction -- 2 Experimental Procedure -- 2.1 Materials -- 2.2 Equipments -- 3 Results and Discussion -- 4 Conclusion -- References -- Comparison of Raw Materials for Making Liquid Smoke with Pyrolysis Method as an Alternative to Formalin and Borax in Food -- 1 Introduction -- 2 Methodology -- 2.1 Trial Procedure -- 2.2 Analysis Stage -- 3 Result and Discussion -- 3.1 The Effect of Comparison of Types of Raw Materials on the Quality of Liquid Smoke -- 3.2 Effect of Distillation Temperature on Liquid Smoke Quality -- 3.3 Effect of Preservation Time Using Liquid Smoke on Tofu Product Quality -- 4 Conclusions -- References -- Utilization of Acid Mining Waste Water as to Alternative Energy Source with Galvanic Cell -- 1 Introduction -- 1.1 Galvanic Cell -- 1.2 Electrolysis Cell -- 1.3 Electrode Potential -- 1.4 Electrolyte -- 1.5 Acid Mine Water -- 2 Research Methodology -- 3 Results and Discussion -- 3.1 Results of the Effect of Electrode Type on Electric Potential and Electric Current -- 3.2 Discussion -- 4 Conclusion -- References -- Biodiesel Production from Waste Cooking Oil with Immobilized Lipase Catalyst Using Activated Carbon as Matrix -- 1 Introduction -- 2 Material and Methods -- 2.1 Materials -- 2.2 Immobilization of Lipase on Activated Carbon -- 2.3 Biodiesel Production from Waste Cooking Oil Using Immobilized Lipase -- 2.4 Analytical Method -- 3 Results and Discussions -- 3.1 Biodiesel Production -- 3.2 Characterization of Biodiesel -- 3.3 Reutilization of the Immobilized Lipase for Biodiesel Synthesis -- 4 Conclusion -- References -- Margarine from RBDPO in Stirred Tanks with Cooling Jacked -- 1 Introduction -- 2 Research Methods -- 2.1 Materials and Instrument -- 3 Results and Discussion. 3.1 Effect of Free Fatty Acid (FFA) Levels in Margarine by Speed and Length of Stirring Time -- 3.2 Effect of Moisture Content of Margarine on Speed and Length of Stirring Time -- 3.3 Effect of Margarine Melting Point on Stirring Speed and Length of Stirring Time -- References -- Biodiesel Production from Tamanu Oil (Callophyllum Inophyllum) with Immobilized Lipase Catalyst Using Activated Carbon as Matrix -- 1 Introduction -- 2 Material and Methods -- 2.1 Materials -- 2.2 Methods -- 2.3 Analysis Procedure -- 3 Results and Discussions -- 3.1 Effect of Mole Percentage of New and Reused Catalysts on % Yield -- 3.2 Density Analysis -- 3.3 Viscosity Analysis -- 3.4 Saponification Analysis -- 3.5 Iodine Analysis -- 3.6 Analysis of Cetane Numbers -- 3.7 GC-MS Analisa Analysis -- 4 Conclusion -- References -- Characteristics of Biobriquette Mixture of Char Gasified Coal and Torreffed Coconut Shell as Fuel Co-firing -- 1 Introduction -- 1.1 Co-firing -- 2 Material and Methods -- 3 Results and Discussion -- 3.1 Characterization of Gasified Char Coal and Coconut Shell Torrification -- 3.2 Biobriquette Characteristics -- 3.3 Ignition Time -- 4 Conclusions -- References -- Power Generation Characteristics of a Crossflow Turbine and a Single Shaft Coupled of Two Crossflow Turbines -- 1 Introduction -- 2 Methodology -- 3 Result and Discussion -- 3.1 Constructing the Small Hydro Power Generation Unit -- 3.2 The Small Hydro Unit Field Testing Field Experimental Test of the Small Hydro Power Generation Unit -- 4 Conclusion -- References -- Making of Effervecent Tablet Detergent from Hibiscus Leaf (Hibiscus Rosa-Sinensis L.) and Pineapple (Anenas Comosus) Peel Extract as Solutions to Domestic Waste Problems -- 1 Introduction -- 2 Experimental Procedure -- 2.1 Material -- 2.2 Equipment -- 2.3 Procedure -- 3 Results and Discussion -- 3.1 pH -- 3.2 Foam Stability. 3.3 Detergency -- 3.4 Insoluble in Water -- 3.5 Dissolve Time -- 3.6 Toxicity Test -- 4 Conclusion -- References -- A Further Modification of Squirrel Cage Single-Phase Induction Motor to Low-Speed Single-Phase Permanent Magnet Generator to Generate Sinusoidal Output Voltage -- 1 Introduction -- 2 Methodology -- 3 Result and Discussion -- 3.1 Modification of the Induction Motor -- 3.2 Output Voltage Characteristic of the Generator -- 4 Conclusion -- References -- Effect of Composition of Coconut Shell Charcoal and Char Gasification on the Quality of Biobriquettes -- 1 Introduction -- 2 Material and Methods -- 3 Result and Discussion -- 3.1 Characterization of Material -- 3.2 Biobriquette Characteristics -- 3.3 The Impact of Varying the Amount of Coconut Shell Charcoal Used and the Biobriquette Size as to Ingnition Time and Burning Time -- 4 Conclusions -- References -- Design and Performance of Savonius Vertical Axis Wind Turbine: A Study Experimental of Blade Models -- 1 Introduction -- 2 Method and Procedure -- 2.1 Method -- 2.2 Procedure and Materials -- 3 Results and Discussion -- 3.1 Initial performance test -- 3.2 Turbine Power -- 3.3 Generator Efficiency -- 4 Conclusion -- References -- Material Substitution for Flexible Pavement Using Waste Material Fly Ash and Bottom Ash from Bukit Asam Electric Steam Power Plant -- 1 Introduction -- 1.1 Research Background -- 1.2 Research Limitations -- 1.3 Benefits of Research -- 2 Literature Review -- 2.1 Previous Research -- 2.2 Asphalt Concrete -- 2.3 Fly Ash and Bottom Ash -- 2.4 XRF (X-Ray Fluoresence) -- 3 Results and Discussion -- 3.1 The Physical Properties of Fly Ash and Bottom Ash (FABA) -- 3.2 The Sieve Analysis Properties of Fly Ash and Bottom Ash (FABA) -- 3.3 Chemical Composition of Fly Ash and Bottom Ash (FABA) -- 4 Conclusions -- References. An Evaluation of Program Education Objectives for Electrical and Electronic Engineering Programme at Politeknik Mukah. Description based on publisher supplied metadata and other sources. Electronic reproduction. Ann Arbor, Michigan : ProQuest Ebook Central, 2024. Available via World Wide Web. Access may be limited to ProQuest Ebook Central affiliated libraries. Electronic books. Caesarendra, Wahyu. Aznury, Martha. Novianti, Leni. Stiawan, Deris. Print version: Husni, Nyayu Latifah Proceedings of the 6th FIRST 2022 International Conference (FIRST-ESCSI 2022) Dordrecht : Atlantis Press (Zeger Karssen),c2023 9789464631173 ProQuest (Firm) Atlantis Highlights in Engineering Series https://ebookcentral.proquest.com/lib/oeawat/detail.action?docID=7233612 Click to View |
language |
English |
format |
eBook |
author |
Husni, Nyayu Latifah. |
spellingShingle |
Husni, Nyayu Latifah. Proceedings of the 6th FIRST 2022 International Conference (FIRST-ESCSI 2022). Atlantis Highlights in Engineering Series ; Intro -- Preface -- Organization -- Contents -- Peer-Review Statements -- 1 Review Procedure -- 2 Quality Criteria -- 3 Key Metrics -- 4 Competing Interests -- Initial Study of Two-Blade Propeller Design Parameter -- 1 Introduction -- 1.1 Definition Terms -- 1.2 Software Based Modeling -- 2 Material and Method -- 2.1 Design Proposed -- 2.2 Formulae Design -- 3 Result and Discussion -- 3.1 Simulation Steps -- 3.2 CAE Analysis -- 4 Conclusion -- References -- The Method of Constant Current - Constant Voltage (CC - CV) for SECA Electric Car Battery Charging with Fuzzy Logic Controller -- 1 Introduction -- 2 Literature Review -- 2.1 Battery Charging -- 2.2 Constant Current-Constant Voltage -- 2.3 Overcharge -- 2.4 Fuzzy Control System -- 3 Equipment Design -- 4 Discussion -- 5 Conclusions -- References -- Design Compression Molding Machine with Hydraulic System -- 1 Introduction -- 2 Methodology -- 3 Result and Discussion -- 4 Result and Discussion -- References -- Manufacture of Food Preservatives from Liquid Smoke as By-Product of Processing Coconut Shells (Cocos Nucifera) -- 1 Introduction -- 2 Methodology -- 3 Result and Discussion -- 3.1 Analysis Pretreatment of Raw Material -- 3.2 Product Quantitative Analysis -- 3.3 Product Qualitative Analysis -- 3.4 Characterizations and Identification of Liquid Smoke Components -- 4 Conclusions -- References -- The Addition of Natural Colour Pigment Brazilin from Sappan Wood Extract (Caesalpinia Sappan Linn) in the Manufacture of Tempeh to Improve Tempeh Product Antioxidant Content -- 1 Introduction -- 1.1 Definition of Sappan Wood -- 1.2 The Content and Benefit of Sappan Wood -- 2 Research Methodology -- 2.1 Research Design -- 2.2 Observation -- 3 Material and Method -- 3.1 Research and Procedure -- 4 Results and Discussions -- 4.1 Analysis of Yield -- 4.2 Analysis of Anthocyanins. 4.3 Analysis of Degree of Acidity (pH) -- 4.4 Tempeh Analysis Before and After Fermentation -- 4.5 Analysis of Antioxidant -- 4.6 Analysis of Water Content -- 4.7 Analysis of Ash Content -- 5 Conclusion -- References -- Producing Liquid Smoke Results from Pyrolysis of Waste Acacia (Acacia Mangum Wild) and Teak Wood (Tectona Grandis) into Organic Pesticides -- 1 Introduction -- 2 Methodology -- 3 Result and Discussion -- 3.1 Analysis Pre-treatment of Raw Material -- 3.2 Analysis of Colour and Odour Analysis of Liquid Smoke -- 3.3 Product Quantitative Analysis -- 3.4 Product Qualitative Analysis -- 3.5 Gas Chromatography-Mass Spectroscopy (GCMS) Analysis -- 4 Conclusions -- References -- Enriching Methane Content from an Anaerobic Digestion Process of Cow Manure -- 1 Introduction -- 2 Materials and Method -- 2.1 Materials -- 2.2 Method -- 3 Results and Discussion -- 4 Conclusion -- References -- Comparative Evaluation of Biofuel Products from EFB (Empty Fruit Bunch) and PKS (Palm Kernel Shell) Based on GC-MS -- 1 Introduction -- 2 Research Method -- 2.1 Thermal Cracking Process -- 2.2 Composition Analysis by GC-MS -- 3 Result and Discussion -- 4 Conclusion -- References -- Separation of Red Palm Oil from Crude Palm Oil Using Ceramic Membrane from Clay and Bentonite -- 1 Introduction -- 2 Research Methods -- 2.1 Materials and Instruments -- 2.2 Procedure -- 3 Results and Dsicussion -- 3.1 Degumming and Neutralization Process of CPO -- 4 Free Fatty Acid Analysis -- 5 Analysis β-Carotene -- References -- Study of the Delignification Process of Kelutuk Banana Stem (Pseudostem of Musa Balbisiana) as Raw Material for Bioethanol Production -- 1 Introduction -- 1.1 Bioetanol -- 1.2 Delignification -- 2 Materials and Methods -- 2.1 Research Materials and Site -- 2.2 Delignification Instrument -- 3 Result and Discussion -- 3.1 Result -- 4 Discussion. 5 Conclusion -- References -- Hydrolysis Reaction Kinetics of Baggasse and Banana Peel in the Process of Bioethanol Production -- 1 Introduction -- 2 Experimental Procedure -- 2.1 Materials -- 2.2 Equipments -- 3 Results and Discussion -- 4 Conclusion -- References -- Comparison of Raw Materials for Making Liquid Smoke with Pyrolysis Method as an Alternative to Formalin and Borax in Food -- 1 Introduction -- 2 Methodology -- 2.1 Trial Procedure -- 2.2 Analysis Stage -- 3 Result and Discussion -- 3.1 The Effect of Comparison of Types of Raw Materials on the Quality of Liquid Smoke -- 3.2 Effect of Distillation Temperature on Liquid Smoke Quality -- 3.3 Effect of Preservation Time Using Liquid Smoke on Tofu Product Quality -- 4 Conclusions -- References -- Utilization of Acid Mining Waste Water as to Alternative Energy Source with Galvanic Cell -- 1 Introduction -- 1.1 Galvanic Cell -- 1.2 Electrolysis Cell -- 1.3 Electrode Potential -- 1.4 Electrolyte -- 1.5 Acid Mine Water -- 2 Research Methodology -- 3 Results and Discussion -- 3.1 Results of the Effect of Electrode Type on Electric Potential and Electric Current -- 3.2 Discussion -- 4 Conclusion -- References -- Biodiesel Production from Waste Cooking Oil with Immobilized Lipase Catalyst Using Activated Carbon as Matrix -- 1 Introduction -- 2 Material and Methods -- 2.1 Materials -- 2.2 Immobilization of Lipase on Activated Carbon -- 2.3 Biodiesel Production from Waste Cooking Oil Using Immobilized Lipase -- 2.4 Analytical Method -- 3 Results and Discussions -- 3.1 Biodiesel Production -- 3.2 Characterization of Biodiesel -- 3.3 Reutilization of the Immobilized Lipase for Biodiesel Synthesis -- 4 Conclusion -- References -- Margarine from RBDPO in Stirred Tanks with Cooling Jacked -- 1 Introduction -- 2 Research Methods -- 2.1 Materials and Instrument -- 3 Results and Discussion. 3.1 Effect of Free Fatty Acid (FFA) Levels in Margarine by Speed and Length of Stirring Time -- 3.2 Effect of Moisture Content of Margarine on Speed and Length of Stirring Time -- 3.3 Effect of Margarine Melting Point on Stirring Speed and Length of Stirring Time -- References -- Biodiesel Production from Tamanu Oil (Callophyllum Inophyllum) with Immobilized Lipase Catalyst Using Activated Carbon as Matrix -- 1 Introduction -- 2 Material and Methods -- 2.1 Materials -- 2.2 Methods -- 2.3 Analysis Procedure -- 3 Results and Discussions -- 3.1 Effect of Mole Percentage of New and Reused Catalysts on % Yield -- 3.2 Density Analysis -- 3.3 Viscosity Analysis -- 3.4 Saponification Analysis -- 3.5 Iodine Analysis -- 3.6 Analysis of Cetane Numbers -- 3.7 GC-MS Analisa Analysis -- 4 Conclusion -- References -- Characteristics of Biobriquette Mixture of Char Gasified Coal and Torreffed Coconut Shell as Fuel Co-firing -- 1 Introduction -- 1.1 Co-firing -- 2 Material and Methods -- 3 Results and Discussion -- 3.1 Characterization of Gasified Char Coal and Coconut Shell Torrification -- 3.2 Biobriquette Characteristics -- 3.3 Ignition Time -- 4 Conclusions -- References -- Power Generation Characteristics of a Crossflow Turbine and a Single Shaft Coupled of Two Crossflow Turbines -- 1 Introduction -- 2 Methodology -- 3 Result and Discussion -- 3.1 Constructing the Small Hydro Power Generation Unit -- 3.2 The Small Hydro Unit Field Testing Field Experimental Test of the Small Hydro Power Generation Unit -- 4 Conclusion -- References -- Making of Effervecent Tablet Detergent from Hibiscus Leaf (Hibiscus Rosa-Sinensis L.) and Pineapple (Anenas Comosus) Peel Extract as Solutions to Domestic Waste Problems -- 1 Introduction -- 2 Experimental Procedure -- 2.1 Material -- 2.2 Equipment -- 2.3 Procedure -- 3 Results and Discussion -- 3.1 pH -- 3.2 Foam Stability. 3.3 Detergency -- 3.4 Insoluble in Water -- 3.5 Dissolve Time -- 3.6 Toxicity Test -- 4 Conclusion -- References -- A Further Modification of Squirrel Cage Single-Phase Induction Motor to Low-Speed Single-Phase Permanent Magnet Generator to Generate Sinusoidal Output Voltage -- 1 Introduction -- 2 Methodology -- 3 Result and Discussion -- 3.1 Modification of the Induction Motor -- 3.2 Output Voltage Characteristic of the Generator -- 4 Conclusion -- References -- Effect of Composition of Coconut Shell Charcoal and Char Gasification on the Quality of Biobriquettes -- 1 Introduction -- 2 Material and Methods -- 3 Result and Discussion -- 3.1 Characterization of Material -- 3.2 Biobriquette Characteristics -- 3.3 The Impact of Varying the Amount of Coconut Shell Charcoal Used and the Biobriquette Size as to Ingnition Time and Burning Time -- 4 Conclusions -- References -- Design and Performance of Savonius Vertical Axis Wind Turbine: A Study Experimental of Blade Models -- 1 Introduction -- 2 Method and Procedure -- 2.1 Method -- 2.2 Procedure and Materials -- 3 Results and Discussion -- 3.1 Initial performance test -- 3.2 Turbine Power -- 3.3 Generator Efficiency -- 4 Conclusion -- References -- Material Substitution for Flexible Pavement Using Waste Material Fly Ash and Bottom Ash from Bukit Asam Electric Steam Power Plant -- 1 Introduction -- 1.1 Research Background -- 1.2 Research Limitations -- 1.3 Benefits of Research -- 2 Literature Review -- 2.1 Previous Research -- 2.2 Asphalt Concrete -- 2.3 Fly Ash and Bottom Ash -- 2.4 XRF (X-Ray Fluoresence) -- 3 Results and Discussion -- 3.1 The Physical Properties of Fly Ash and Bottom Ash (FABA) -- 3.2 The Sieve Analysis Properties of Fly Ash and Bottom Ash (FABA) -- 3.3 Chemical Composition of Fly Ash and Bottom Ash (FABA) -- 4 Conclusions -- References. An Evaluation of Program Education Objectives for Electrical and Electronic Engineering Programme at Politeknik Mukah. |
author_facet |
Husni, Nyayu Latifah. Caesarendra, Wahyu. Aznury, Martha. Novianti, Leni. Stiawan, Deris. |
author_variant |
n l h nl nlh |
author2 |
Caesarendra, Wahyu. Aznury, Martha. Novianti, Leni. Stiawan, Deris. |
author2_variant |
w c wc m a ma l n ln d s ds |
author2_role |
TeilnehmendeR TeilnehmendeR TeilnehmendeR TeilnehmendeR |
author_sort |
Husni, Nyayu Latifah. |
title |
Proceedings of the 6th FIRST 2022 International Conference (FIRST-ESCSI 2022). |
title_full |
Proceedings of the 6th FIRST 2022 International Conference (FIRST-ESCSI 2022). |
title_fullStr |
Proceedings of the 6th FIRST 2022 International Conference (FIRST-ESCSI 2022). |
title_full_unstemmed |
Proceedings of the 6th FIRST 2022 International Conference (FIRST-ESCSI 2022). |
title_auth |
Proceedings of the 6th FIRST 2022 International Conference (FIRST-ESCSI 2022). |
title_new |
Proceedings of the 6th FIRST 2022 International Conference (FIRST-ESCSI 2022). |
title_sort |
proceedings of the 6th first 2022 international conference (first-escsi 2022). |
series |
Atlantis Highlights in Engineering Series ; |
series2 |
Atlantis Highlights in Engineering Series ; |
publisher |
Atlantis Press (Zeger Karssen), |
publishDate |
2023 |
physical |
1 online resource (555 pages) |
edition |
1st ed. |
contents |
Intro -- Preface -- Organization -- Contents -- Peer-Review Statements -- 1 Review Procedure -- 2 Quality Criteria -- 3 Key Metrics -- 4 Competing Interests -- Initial Study of Two-Blade Propeller Design Parameter -- 1 Introduction -- 1.1 Definition Terms -- 1.2 Software Based Modeling -- 2 Material and Method -- 2.1 Design Proposed -- 2.2 Formulae Design -- 3 Result and Discussion -- 3.1 Simulation Steps -- 3.2 CAE Analysis -- 4 Conclusion -- References -- The Method of Constant Current - Constant Voltage (CC - CV) for SECA Electric Car Battery Charging with Fuzzy Logic Controller -- 1 Introduction -- 2 Literature Review -- 2.1 Battery Charging -- 2.2 Constant Current-Constant Voltage -- 2.3 Overcharge -- 2.4 Fuzzy Control System -- 3 Equipment Design -- 4 Discussion -- 5 Conclusions -- References -- Design Compression Molding Machine with Hydraulic System -- 1 Introduction -- 2 Methodology -- 3 Result and Discussion -- 4 Result and Discussion -- References -- Manufacture of Food Preservatives from Liquid Smoke as By-Product of Processing Coconut Shells (Cocos Nucifera) -- 1 Introduction -- 2 Methodology -- 3 Result and Discussion -- 3.1 Analysis Pretreatment of Raw Material -- 3.2 Product Quantitative Analysis -- 3.3 Product Qualitative Analysis -- 3.4 Characterizations and Identification of Liquid Smoke Components -- 4 Conclusions -- References -- The Addition of Natural Colour Pigment Brazilin from Sappan Wood Extract (Caesalpinia Sappan Linn) in the Manufacture of Tempeh to Improve Tempeh Product Antioxidant Content -- 1 Introduction -- 1.1 Definition of Sappan Wood -- 1.2 The Content and Benefit of Sappan Wood -- 2 Research Methodology -- 2.1 Research Design -- 2.2 Observation -- 3 Material and Method -- 3.1 Research and Procedure -- 4 Results and Discussions -- 4.1 Analysis of Yield -- 4.2 Analysis of Anthocyanins. 4.3 Analysis of Degree of Acidity (pH) -- 4.4 Tempeh Analysis Before and After Fermentation -- 4.5 Analysis of Antioxidant -- 4.6 Analysis of Water Content -- 4.7 Analysis of Ash Content -- 5 Conclusion -- References -- Producing Liquid Smoke Results from Pyrolysis of Waste Acacia (Acacia Mangum Wild) and Teak Wood (Tectona Grandis) into Organic Pesticides -- 1 Introduction -- 2 Methodology -- 3 Result and Discussion -- 3.1 Analysis Pre-treatment of Raw Material -- 3.2 Analysis of Colour and Odour Analysis of Liquid Smoke -- 3.3 Product Quantitative Analysis -- 3.4 Product Qualitative Analysis -- 3.5 Gas Chromatography-Mass Spectroscopy (GCMS) Analysis -- 4 Conclusions -- References -- Enriching Methane Content from an Anaerobic Digestion Process of Cow Manure -- 1 Introduction -- 2 Materials and Method -- 2.1 Materials -- 2.2 Method -- 3 Results and Discussion -- 4 Conclusion -- References -- Comparative Evaluation of Biofuel Products from EFB (Empty Fruit Bunch) and PKS (Palm Kernel Shell) Based on GC-MS -- 1 Introduction -- 2 Research Method -- 2.1 Thermal Cracking Process -- 2.2 Composition Analysis by GC-MS -- 3 Result and Discussion -- 4 Conclusion -- References -- Separation of Red Palm Oil from Crude Palm Oil Using Ceramic Membrane from Clay and Bentonite -- 1 Introduction -- 2 Research Methods -- 2.1 Materials and Instruments -- 2.2 Procedure -- 3 Results and Dsicussion -- 3.1 Degumming and Neutralization Process of CPO -- 4 Free Fatty Acid Analysis -- 5 Analysis β-Carotene -- References -- Study of the Delignification Process of Kelutuk Banana Stem (Pseudostem of Musa Balbisiana) as Raw Material for Bioethanol Production -- 1 Introduction -- 1.1 Bioetanol -- 1.2 Delignification -- 2 Materials and Methods -- 2.1 Research Materials and Site -- 2.2 Delignification Instrument -- 3 Result and Discussion -- 3.1 Result -- 4 Discussion. 5 Conclusion -- References -- Hydrolysis Reaction Kinetics of Baggasse and Banana Peel in the Process of Bioethanol Production -- 1 Introduction -- 2 Experimental Procedure -- 2.1 Materials -- 2.2 Equipments -- 3 Results and Discussion -- 4 Conclusion -- References -- Comparison of Raw Materials for Making Liquid Smoke with Pyrolysis Method as an Alternative to Formalin and Borax in Food -- 1 Introduction -- 2 Methodology -- 2.1 Trial Procedure -- 2.2 Analysis Stage -- 3 Result and Discussion -- 3.1 The Effect of Comparison of Types of Raw Materials on the Quality of Liquid Smoke -- 3.2 Effect of Distillation Temperature on Liquid Smoke Quality -- 3.3 Effect of Preservation Time Using Liquid Smoke on Tofu Product Quality -- 4 Conclusions -- References -- Utilization of Acid Mining Waste Water as to Alternative Energy Source with Galvanic Cell -- 1 Introduction -- 1.1 Galvanic Cell -- 1.2 Electrolysis Cell -- 1.3 Electrode Potential -- 1.4 Electrolyte -- 1.5 Acid Mine Water -- 2 Research Methodology -- 3 Results and Discussion -- 3.1 Results of the Effect of Electrode Type on Electric Potential and Electric Current -- 3.2 Discussion -- 4 Conclusion -- References -- Biodiesel Production from Waste Cooking Oil with Immobilized Lipase Catalyst Using Activated Carbon as Matrix -- 1 Introduction -- 2 Material and Methods -- 2.1 Materials -- 2.2 Immobilization of Lipase on Activated Carbon -- 2.3 Biodiesel Production from Waste Cooking Oil Using Immobilized Lipase -- 2.4 Analytical Method -- 3 Results and Discussions -- 3.1 Biodiesel Production -- 3.2 Characterization of Biodiesel -- 3.3 Reutilization of the Immobilized Lipase for Biodiesel Synthesis -- 4 Conclusion -- References -- Margarine from RBDPO in Stirred Tanks with Cooling Jacked -- 1 Introduction -- 2 Research Methods -- 2.1 Materials and Instrument -- 3 Results and Discussion. 3.1 Effect of Free Fatty Acid (FFA) Levels in Margarine by Speed and Length of Stirring Time -- 3.2 Effect of Moisture Content of Margarine on Speed and Length of Stirring Time -- 3.3 Effect of Margarine Melting Point on Stirring Speed and Length of Stirring Time -- References -- Biodiesel Production from Tamanu Oil (Callophyllum Inophyllum) with Immobilized Lipase Catalyst Using Activated Carbon as Matrix -- 1 Introduction -- 2 Material and Methods -- 2.1 Materials -- 2.2 Methods -- 2.3 Analysis Procedure -- 3 Results and Discussions -- 3.1 Effect of Mole Percentage of New and Reused Catalysts on % Yield -- 3.2 Density Analysis -- 3.3 Viscosity Analysis -- 3.4 Saponification Analysis -- 3.5 Iodine Analysis -- 3.6 Analysis of Cetane Numbers -- 3.7 GC-MS Analisa Analysis -- 4 Conclusion -- References -- Characteristics of Biobriquette Mixture of Char Gasified Coal and Torreffed Coconut Shell as Fuel Co-firing -- 1 Introduction -- 1.1 Co-firing -- 2 Material and Methods -- 3 Results and Discussion -- 3.1 Characterization of Gasified Char Coal and Coconut Shell Torrification -- 3.2 Biobriquette Characteristics -- 3.3 Ignition Time -- 4 Conclusions -- References -- Power Generation Characteristics of a Crossflow Turbine and a Single Shaft Coupled of Two Crossflow Turbines -- 1 Introduction -- 2 Methodology -- 3 Result and Discussion -- 3.1 Constructing the Small Hydro Power Generation Unit -- 3.2 The Small Hydro Unit Field Testing Field Experimental Test of the Small Hydro Power Generation Unit -- 4 Conclusion -- References -- Making of Effervecent Tablet Detergent from Hibiscus Leaf (Hibiscus Rosa-Sinensis L.) and Pineapple (Anenas Comosus) Peel Extract as Solutions to Domestic Waste Problems -- 1 Introduction -- 2 Experimental Procedure -- 2.1 Material -- 2.2 Equipment -- 2.3 Procedure -- 3 Results and Discussion -- 3.1 pH -- 3.2 Foam Stability. 3.3 Detergency -- 3.4 Insoluble in Water -- 3.5 Dissolve Time -- 3.6 Toxicity Test -- 4 Conclusion -- References -- A Further Modification of Squirrel Cage Single-Phase Induction Motor to Low-Speed Single-Phase Permanent Magnet Generator to Generate Sinusoidal Output Voltage -- 1 Introduction -- 2 Methodology -- 3 Result and Discussion -- 3.1 Modification of the Induction Motor -- 3.2 Output Voltage Characteristic of the Generator -- 4 Conclusion -- References -- Effect of Composition of Coconut Shell Charcoal and Char Gasification on the Quality of Biobriquettes -- 1 Introduction -- 2 Material and Methods -- 3 Result and Discussion -- 3.1 Characterization of Material -- 3.2 Biobriquette Characteristics -- 3.3 The Impact of Varying the Amount of Coconut Shell Charcoal Used and the Biobriquette Size as to Ingnition Time and Burning Time -- 4 Conclusions -- References -- Design and Performance of Savonius Vertical Axis Wind Turbine: A Study Experimental of Blade Models -- 1 Introduction -- 2 Method and Procedure -- 2.1 Method -- 2.2 Procedure and Materials -- 3 Results and Discussion -- 3.1 Initial performance test -- 3.2 Turbine Power -- 3.3 Generator Efficiency -- 4 Conclusion -- References -- Material Substitution for Flexible Pavement Using Waste Material Fly Ash and Bottom Ash from Bukit Asam Electric Steam Power Plant -- 1 Introduction -- 1.1 Research Background -- 1.2 Research Limitations -- 1.3 Benefits of Research -- 2 Literature Review -- 2.1 Previous Research -- 2.2 Asphalt Concrete -- 2.3 Fly Ash and Bottom Ash -- 2.4 XRF (X-Ray Fluoresence) -- 3 Results and Discussion -- 3.1 The Physical Properties of Fly Ash and Bottom Ash (FABA) -- 3.2 The Sieve Analysis Properties of Fly Ash and Bottom Ash (FABA) -- 3.3 Chemical Composition of Fly Ash and Bottom Ash (FABA) -- 4 Conclusions -- References. An Evaluation of Program Education Objectives for Electrical and Electronic Engineering Programme at Politeknik Mukah. |
isbn |
9789464631180 9789464631173 |
callnumber-first |
T - Technology |
callnumber-subject |
TK - Electrical and Nuclear Engineering |
callnumber-label |
TK1-9971 |
callnumber-sort |
TK 11 49971 |
genre |
Electronic books. |
genre_facet |
Electronic books. |
url |
https://ebookcentral.proquest.com/lib/oeawat/detail.action?docID=7233612 |
illustrated |
Not Illustrated |
oclc_num |
1385455080 |
work_keys_str_mv |
AT husninyayulatifah proceedingsofthe6thfirst2022internationalconferencefirstescsi2022 AT caesarendrawahyu proceedingsofthe6thfirst2022internationalconferencefirstescsi2022 AT aznurymartha proceedingsofthe6thfirst2022internationalconferencefirstescsi2022 AT noviantileni proceedingsofthe6thfirst2022internationalconferencefirstescsi2022 AT stiawanderis proceedingsofthe6thfirst2022internationalconferencefirstescsi2022 |
status_str |
n |
ids_txt_mv |
(MiAaPQ)5007233612 (Au-PeEL)EBL7233612 (OCoLC)1385455080 |
carrierType_str_mv |
cr |
hierarchy_parent_title |
Atlantis Highlights in Engineering Series ; v.14 |
is_hierarchy_title |
Proceedings of the 6th FIRST 2022 International Conference (FIRST-ESCSI 2022). |
container_title |
Atlantis Highlights in Engineering Series ; v.14 |
author2_original_writing_str_mv |
noLinkedField noLinkedField noLinkedField noLinkedField |
_version_ |
1792331065939984385 |
fullrecord |
<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>12432nam a22005053i 4500</leader><controlfield tag="001">5007233612</controlfield><controlfield tag="003">MiAaPQ</controlfield><controlfield tag="005">20240229073848.0</controlfield><controlfield tag="006">m o d | </controlfield><controlfield tag="007">cr cnu||||||||</controlfield><controlfield tag="008">240229s2023 xx o ||||0 eng d</controlfield><datafield tag="020" ind1=" " ind2=" "><subfield code="a">9789464631180</subfield><subfield code="q">(electronic bk.)</subfield></datafield><datafield tag="020" ind1=" " ind2=" "><subfield code="z">9789464631173</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(MiAaPQ)5007233612</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(Au-PeEL)EBL7233612</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(OCoLC)1385455080</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">MiAaPQ</subfield><subfield code="b">eng</subfield><subfield code="e">rda</subfield><subfield code="e">pn</subfield><subfield code="c">MiAaPQ</subfield><subfield code="d">MiAaPQ</subfield></datafield><datafield tag="050" ind1=" " ind2="4"><subfield code="a">TK1-9971</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Husni, Nyayu Latifah.</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Proceedings of the 6th FIRST 2022 International Conference (FIRST-ESCSI 2022).</subfield></datafield><datafield tag="250" ind1=" " ind2=" "><subfield code="a">1st ed.</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="a">Dordrecht :</subfield><subfield code="b">Atlantis Press (Zeger Karssen),</subfield><subfield code="c">2023.</subfield></datafield><datafield tag="264" ind1=" " ind2="4"><subfield code="c">©2023.</subfield></datafield><datafield tag="300" ind1=" " ind2=" "><subfield code="a">1 online resource (555 pages)</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">computer</subfield><subfield code="b">c</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">online resource</subfield><subfield code="b">cr</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="490" ind1="1" ind2=" "><subfield code="a">Atlantis Highlights in Engineering Series ;</subfield><subfield code="v">v.14</subfield></datafield><datafield tag="505" ind1="0" ind2=" "><subfield code="a">Intro -- Preface -- Organization -- Contents -- Peer-Review Statements -- 1 Review Procedure -- 2 Quality Criteria -- 3 Key Metrics -- 4 Competing Interests -- Initial Study of Two-Blade Propeller Design Parameter -- 1 Introduction -- 1.1 Definition Terms -- 1.2 Software Based Modeling -- 2 Material and Method -- 2.1 Design Proposed -- 2.2 Formulae Design -- 3 Result and Discussion -- 3.1 Simulation Steps -- 3.2 CAE Analysis -- 4 Conclusion -- References -- The Method of Constant Current - Constant Voltage (CC - CV) for SECA Electric Car Battery Charging with Fuzzy Logic Controller -- 1 Introduction -- 2 Literature Review -- 2.1 Battery Charging -- 2.2 Constant Current-Constant Voltage -- 2.3 Overcharge -- 2.4 Fuzzy Control System -- 3 Equipment Design -- 4 Discussion -- 5 Conclusions -- References -- Design Compression Molding Machine with Hydraulic System -- 1 Introduction -- 2 Methodology -- 3 Result and Discussion -- 4 Result and Discussion -- References -- Manufacture of Food Preservatives from Liquid Smoke as By-Product of Processing Coconut Shells (Cocos Nucifera) -- 1 Introduction -- 2 Methodology -- 3 Result and Discussion -- 3.1 Analysis Pretreatment of Raw Material -- 3.2 Product Quantitative Analysis -- 3.3 Product Qualitative Analysis -- 3.4 Characterizations and Identification of Liquid Smoke Components -- 4 Conclusions -- References -- The Addition of Natural Colour Pigment Brazilin from Sappan Wood Extract (Caesalpinia Sappan Linn) in the Manufacture of Tempeh to Improve Tempeh Product Antioxidant Content -- 1 Introduction -- 1.1 Definition of Sappan Wood -- 1.2 The Content and Benefit of Sappan Wood -- 2 Research Methodology -- 2.1 Research Design -- 2.2 Observation -- 3 Material and Method -- 3.1 Research and Procedure -- 4 Results and Discussions -- 4.1 Analysis of Yield -- 4.2 Analysis of Anthocyanins.</subfield></datafield><datafield tag="505" ind1="8" ind2=" "><subfield code="a">4.3 Analysis of Degree of Acidity (pH) -- 4.4 Tempeh Analysis Before and After Fermentation -- 4.5 Analysis of Antioxidant -- 4.6 Analysis of Water Content -- 4.7 Analysis of Ash Content -- 5 Conclusion -- References -- Producing Liquid Smoke Results from Pyrolysis of Waste Acacia (Acacia Mangum Wild) and Teak Wood (Tectona Grandis) into Organic Pesticides -- 1 Introduction -- 2 Methodology -- 3 Result and Discussion -- 3.1 Analysis Pre-treatment of Raw Material -- 3.2 Analysis of Colour and Odour Analysis of Liquid Smoke -- 3.3 Product Quantitative Analysis -- 3.4 Product Qualitative Analysis -- 3.5 Gas Chromatography-Mass Spectroscopy (GCMS) Analysis -- 4 Conclusions -- References -- Enriching Methane Content from an Anaerobic Digestion Process of Cow Manure -- 1 Introduction -- 2 Materials and Method -- 2.1 Materials -- 2.2 Method -- 3 Results and Discussion -- 4 Conclusion -- References -- Comparative Evaluation of Biofuel Products from EFB (Empty Fruit Bunch) and PKS (Palm Kernel Shell) Based on GC-MS -- 1 Introduction -- 2 Research Method -- 2.1 Thermal Cracking Process -- 2.2 Composition Analysis by GC-MS -- 3 Result and Discussion -- 4 Conclusion -- References -- Separation of Red Palm Oil from Crude Palm Oil Using Ceramic Membrane from Clay and Bentonite -- 1 Introduction -- 2 Research Methods -- 2.1 Materials and Instruments -- 2.2 Procedure -- 3 Results and Dsicussion -- 3.1 Degumming and Neutralization Process of CPO -- 4 Free Fatty Acid Analysis -- 5 Analysis β-Carotene -- References -- Study of the Delignification Process of Kelutuk Banana Stem (Pseudostem of Musa Balbisiana) as Raw Material for Bioethanol Production -- 1 Introduction -- 1.1 Bioetanol -- 1.2 Delignification -- 2 Materials and Methods -- 2.1 Research Materials and Site -- 2.2 Delignification Instrument -- 3 Result and Discussion -- 3.1 Result -- 4 Discussion.</subfield></datafield><datafield tag="505" ind1="8" ind2=" "><subfield code="a">5 Conclusion -- References -- Hydrolysis Reaction Kinetics of Baggasse and Banana Peel in the Process of Bioethanol Production -- 1 Introduction -- 2 Experimental Procedure -- 2.1 Materials -- 2.2 Equipments -- 3 Results and Discussion -- 4 Conclusion -- References -- Comparison of Raw Materials for Making Liquid Smoke with Pyrolysis Method as an Alternative to Formalin and Borax in Food -- 1 Introduction -- 2 Methodology -- 2.1 Trial Procedure -- 2.2 Analysis Stage -- 3 Result and Discussion -- 3.1 The Effect of Comparison of Types of Raw Materials on the Quality of Liquid Smoke -- 3.2 Effect of Distillation Temperature on Liquid Smoke Quality -- 3.3 Effect of Preservation Time Using Liquid Smoke on Tofu Product Quality -- 4 Conclusions -- References -- Utilization of Acid Mining Waste Water as to Alternative Energy Source with Galvanic Cell -- 1 Introduction -- 1.1 Galvanic Cell -- 1.2 Electrolysis Cell -- 1.3 Electrode Potential -- 1.4 Electrolyte -- 1.5 Acid Mine Water -- 2 Research Methodology -- 3 Results and Discussion -- 3.1 Results of the Effect of Electrode Type on Electric Potential and Electric Current -- 3.2 Discussion -- 4 Conclusion -- References -- Biodiesel Production from Waste Cooking Oil with Immobilized Lipase Catalyst Using Activated Carbon as Matrix -- 1 Introduction -- 2 Material and Methods -- 2.1 Materials -- 2.2 Immobilization of Lipase on Activated Carbon -- 2.3 Biodiesel Production from Waste Cooking Oil Using Immobilized Lipase -- 2.4 Analytical Method -- 3 Results and Discussions -- 3.1 Biodiesel Production -- 3.2 Characterization of Biodiesel -- 3.3 Reutilization of the Immobilized Lipase for Biodiesel Synthesis -- 4 Conclusion -- References -- Margarine from RBDPO in Stirred Tanks with Cooling Jacked -- 1 Introduction -- 2 Research Methods -- 2.1 Materials and Instrument -- 3 Results and Discussion.</subfield></datafield><datafield tag="505" ind1="8" ind2=" "><subfield code="a">3.1 Effect of Free Fatty Acid (FFA) Levels in Margarine by Speed and Length of Stirring Time -- 3.2 Effect of Moisture Content of Margarine on Speed and Length of Stirring Time -- 3.3 Effect of Margarine Melting Point on Stirring Speed and Length of Stirring Time -- References -- Biodiesel Production from Tamanu Oil (Callophyllum Inophyllum) with Immobilized Lipase Catalyst Using Activated Carbon as Matrix -- 1 Introduction -- 2 Material and Methods -- 2.1 Materials -- 2.2 Methods -- 2.3 Analysis Procedure -- 3 Results and Discussions -- 3.1 Effect of Mole Percentage of New and Reused Catalysts on % Yield -- 3.2 Density Analysis -- 3.3 Viscosity Analysis -- 3.4 Saponification Analysis -- 3.5 Iodine Analysis -- 3.6 Analysis of Cetane Numbers -- 3.7 GC-MS Analisa Analysis -- 4 Conclusion -- References -- Characteristics of Biobriquette Mixture of Char Gasified Coal and Torreffed Coconut Shell as Fuel Co-firing -- 1 Introduction -- 1.1 Co-firing -- 2 Material and Methods -- 3 Results and Discussion -- 3.1 Characterization of Gasified Char Coal and Coconut Shell Torrification -- 3.2 Biobriquette Characteristics -- 3.3 Ignition Time -- 4 Conclusions -- References -- Power Generation Characteristics of a Crossflow Turbine and a Single Shaft Coupled of Two Crossflow Turbines -- 1 Introduction -- 2 Methodology -- 3 Result and Discussion -- 3.1 Constructing the Small Hydro Power Generation Unit -- 3.2 The Small Hydro Unit Field Testing Field Experimental Test of the Small Hydro Power Generation Unit -- 4 Conclusion -- References -- Making of Effervecent Tablet Detergent from Hibiscus Leaf (Hibiscus Rosa-Sinensis L.) and Pineapple (Anenas Comosus) Peel Extract as Solutions to Domestic Waste Problems -- 1 Introduction -- 2 Experimental Procedure -- 2.1 Material -- 2.2 Equipment -- 2.3 Procedure -- 3 Results and Discussion -- 3.1 pH -- 3.2 Foam Stability.</subfield></datafield><datafield tag="505" ind1="8" ind2=" "><subfield code="a">3.3 Detergency -- 3.4 Insoluble in Water -- 3.5 Dissolve Time -- 3.6 Toxicity Test -- 4 Conclusion -- References -- A Further Modification of Squirrel Cage Single-Phase Induction Motor to Low-Speed Single-Phase Permanent Magnet Generator to Generate Sinusoidal Output Voltage -- 1 Introduction -- 2 Methodology -- 3 Result and Discussion -- 3.1 Modification of the Induction Motor -- 3.2 Output Voltage Characteristic of the Generator -- 4 Conclusion -- References -- Effect of Composition of Coconut Shell Charcoal and Char Gasification on the Quality of Biobriquettes -- 1 Introduction -- 2 Material and Methods -- 3 Result and Discussion -- 3.1 Characterization of Material -- 3.2 Biobriquette Characteristics -- 3.3 The Impact of Varying the Amount of Coconut Shell Charcoal Used and the Biobriquette Size as to Ingnition Time and Burning Time -- 4 Conclusions -- References -- Design and Performance of Savonius Vertical Axis Wind Turbine: A Study Experimental of Blade Models -- 1 Introduction -- 2 Method and Procedure -- 2.1 Method -- 2.2 Procedure and Materials -- 3 Results and Discussion -- 3.1 Initial performance test -- 3.2 Turbine Power -- 3.3 Generator Efficiency -- 4 Conclusion -- References -- Material Substitution for Flexible Pavement Using Waste Material Fly Ash and Bottom Ash from Bukit Asam Electric Steam Power Plant -- 1 Introduction -- 1.1 Research Background -- 1.2 Research Limitations -- 1.3 Benefits of Research -- 2 Literature Review -- 2.1 Previous Research -- 2.2 Asphalt Concrete -- 2.3 Fly Ash and Bottom Ash -- 2.4 XRF (X-Ray Fluoresence) -- 3 Results and Discussion -- 3.1 The Physical Properties of Fly Ash and Bottom Ash (FABA) -- 3.2 The Sieve Analysis Properties of Fly Ash and Bottom Ash (FABA) -- 3.3 Chemical Composition of Fly Ash and Bottom Ash (FABA) -- 4 Conclusions -- References.</subfield></datafield><datafield tag="505" ind1="8" ind2=" "><subfield code="a">An Evaluation of Program Education Objectives for Electrical and Electronic Engineering Programme at Politeknik Mukah.</subfield></datafield><datafield tag="588" ind1=" " ind2=" "><subfield code="a">Description based on publisher supplied metadata and other sources.</subfield></datafield><datafield tag="590" ind1=" " ind2=" "><subfield code="a">Electronic reproduction. Ann Arbor, Michigan : ProQuest Ebook Central, 2024. Available via World Wide Web. Access may be limited to ProQuest Ebook Central affiliated libraries. </subfield></datafield><datafield tag="655" ind1=" " ind2="4"><subfield code="a">Electronic books.</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Caesarendra, Wahyu.</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Aznury, Martha.</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Novianti, Leni.</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Stiawan, Deris.</subfield></datafield><datafield tag="776" ind1="0" ind2="8"><subfield code="i">Print version:</subfield><subfield code="a">Husni, Nyayu Latifah</subfield><subfield code="t">Proceedings of the 6th FIRST 2022 International Conference (FIRST-ESCSI 2022)</subfield><subfield code="d">Dordrecht : Atlantis Press (Zeger Karssen),c2023</subfield><subfield code="z">9789464631173</subfield></datafield><datafield tag="797" ind1="2" ind2=" "><subfield code="a">ProQuest (Firm)</subfield></datafield><datafield tag="830" ind1=" " ind2="0"><subfield code="a">Atlantis Highlights in Engineering Series</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://ebookcentral.proquest.com/lib/oeawat/detail.action?docID=7233612</subfield><subfield code="z">Click to View</subfield></datafield></record></collection> |