Sustainable construction materials : : from paste to concrete / / editor, Yeonung Jeong.

• TeilnehmendeR: Jeong, Yeonung ,
• Place / Publishing House: Basel : : MDPI,, [2023]; ©2023
• Year of Publication: 2023
• Language: English
• Physical Description: 1 online resource

With increasing attention on the reduction of CO2 emissions, the sustainability of construction materials has become one of the most growing issues in concrete science and engineering research fields. New sustainable construction materials, such as alkali-activated materials, calcium sulfoaluminate (CSA) cement, and limestone calcined clay cement (LC3), have been suggested and high-performance and/or highly durable construction materials using special admixtures, such as nanomaterials, have been studied to reduce the environmental impact during the life cycle of construction materials. This Special Issue aims to highlight and share recent findings in developing new sustainable cementitious materials, modeling their hydration kinetics, investigating their microstructure, improving the performance and durability of cementitious materials using functional supplementary ingredients, suggesting novel test methods for new construction materials, etc. In this Special Issue are presented the following areas: Sustainable concrete and alternative binders; Hydration kinetics of sustainable cementitious materials; Characterization of sustainable cementitious materials; Re-utilization of industrial by-products for construction materials; High strength and durable cementitious materials; Property enhancement by functional additives; Energy storage through construction materials.

Table of Contents

Contents -- About the Editor vii -- Ali Naqi, Brice Delsaute, Markus K ¨onigsberger and St´ephanie Staquet -- Effect of Solution-to-Binder Ratio and Alkalinity on Setting and Early-Age Properties of -- Alkali-Activated Slag-Fly Ash Binders -- Reprinted from: Materials 2022, 16, 373, doi:10.3390/ma16010373 1 -- Tereza Pavl ˚u, Namratha V. Khanapur, Kristina Foˇrtov ´a, Diana Mariakov´a, Bhavna Tripathi -- and Tarush Chandra et al. -- Design of Performance-Based Concrete Using Sand Reclaimed from Construction and -- Demolition Waste-Comparative Study of Czechia and India -- Reprinted from: Materials 2022, 15, 7873, doi:10.3390/ma15227873 21 -- Byung-Jun Kim, Geon-Wook Lee and Young-Cheol Choi -- Hydration and Mechanical Properties of High-Volume Fly Ash Concrete with Nano-Silica and -- Silica Fume -- Reprinted from: Materials 2022, 15, 6599, doi:10.3390/ma15196599 49 -- Todor Zhelyazov -- Numerical Simulation of the Response of Concrete Structural Elements Containing a -- Self-Healing Agent -- Reprinted from: Materials 2022, 15, 1233, doi:10.3390/ma15031233 65 -- Woo Sung Yum, Juan Yu, Dongho Jeon, Haemin Song, Sungwon Sim and Do Hoon Kim et -- al. -- Mechanical and Durability Properties of Cementless Concretes Made Using Three Types of -- CaO-Activated GGBFS Binders -- Reprinted from: Materials 2021, 15, 271, doi:10.3390/ma15010271 79 -- Solmoi Park, Namkon Lee, Gi-Hong An, Kyeong-Taek Koh and Gum-Sung Ryu -- Modeling the Effect of Alternative Cementitious Binders in Ultra-High-Performance Concrete -- Reprinted from: Materials 2021, 14, 7333, doi:10.3390/ma14237333 95 -- Wilfrido Martinez-Molina, Hugo L. Chavez-Garcia, Tezozomoc Perez-Lopez, Elia M. -- Alonso-Guzman, Mauricio Arreola-Sanchez and Marco A. Navarrete-Seras et al. -- Effect of the Addition of Agribusiness and Industrial Wastes as a Partial Substitution of Portland -- Cement for the Carbonation of Mortars -- Reprinted from: Materials 2021, 14, 7276, doi:10.3390/ma14237276 103 -- Banu Sizirici, Yohanna Fseha, Chung-Suk Cho, Ibrahim Yildiz and Young-Ji Byon -- A Review of Carbon Footprint Reduction in Construction Industry, from Design to Operation -- Reprinted from: Materials 2021, 14, 6094, doi:10.3390/ma14206094 125 -- Miyeon Kim, Hyunggeun Kim and Jinchul Park -- Empirical NOx Removal Analysis of Photocatalytic Construction Materials at Real-Scale -- Reprinted from: Materials 2021, 14, 5717, doi:10.3390/ma14195717 143 -- Andreja Padovnik and Violeta Bokan-Bosiljkov -- The Influence of Dry Hydrated Limes on the Fresh and Hardened Properties of Architectural -- Injection Grout -- Reprinted from: Materials 2021, 14, 5585, doi:10.3390/ma14195585 161 -- v -- Hyun-Sub Yoon, Keun-Hyeok Yang, Kwang-Myong Lee and Seung-Jun Kwon -- Service Life Evaluation for RC Sewer Structure Repaired with Bacteria Mixed Coating: Through -- Probabilistic and Deterministic Method -- Reprinted from: Materials 2021, 14, 5424, doi:10.3390/ma14185424 177 -- Ehsan Nasseralshariati, Danial Mohammadzadeh, Nader Karballaeezadeh, Amir Mosavi, -- Uwe Reuter and Murat Saatcioglu -- The Effect of Incorporating Industrials Wastewater on Durability and Long-Term Strength of -- Concrete -- Reprinted from: Materials 2021, 14, 4088, doi:10.3390/ma14154088 197 -- Mei-Yu Xuan, Yi-Sheng Wang, Xiao-Yong Wang, Han-Seung Lee and Seung-Jun Kwon -- Effect of Cement Types and Superabsorbent Polymers on the Properties of Sustainable -- Ultra-High-Performance Paste -- Reprinted from: Materials 2021, 14, 1497, doi:10.3390/ma14061497 221 -- Dongho Jeon, Woo Sung Yum, Haemin Song, Seyoon Yoon, Younghoon Bae and Jae Eun Oh -- Use of Coal Bottom Ash and CaO-CaCl2-Activated GGBFS Binder in the Manufacturing of -- Artificial Fine Aggregates through Cold-Bonded Pelletization -- Reprinted from: Materials 2020, 13, 5598, doi:10.3390/ma13245598 241 -- Sun-Jae Yoo, Tian-Feng Yuan, Se-Hee Hong and Young-Soo Yoon -- Effect of Strengthening Methods on Two-Way Slab under Low-Velocity Impact Loading -- Reprinted from: Materials 2020, 13, 5603, doi:10.3390/ma13245603 259 -- Junxing Liu, Hyeonseok Jee, Myungkwan Lim, Joo Hyung Kim, Seung Jun Kwon and -- Kwang Myong Lee et al. -- Photocatalytic Performance Evaluation of Titanium Dioxide Nanotube-Reinforced -- Cement Paste -- Reprinted from: Materials 2020, 13, 5423, doi:10.3390/ma13235423 275 -- Rizwan Hameed, Joonho Seo, Solmoi Park, Issam T. Amr and H.K. Lee -- CO2 Uptake and Physicochemical Properties of Carbonation-Cured Ternary Blend Portland -- Cement-Metakaolin-Limestone Pastes -- Reprinted from: Materials 2020, 13, 4656, doi:10.3390/ma13204656 291 -- Hyunuk Kang, Nankyoung Lee and Juhyuk Moon -- Elucidation of the Hydration Reaction of UHPC Using the PONKCS Method -- Reprinted from: Materials 2020, 13, 4661, doi:10.3390/ma13204661 305 -- Kwang-Myong Lee, Young-Cheol Choi, Byoungsun Park, Jinkyo F. Choo and Sung-Won Yoo -- Effect of Clinker Binder and Aggregates on Autogenous Healing in Post-Crack Flexural -- Behavior of Concrete Members -- Reprinted from: Materials 2020, 13, 4516, doi:10.3390/ma13204516 321 -- Se-Jin Choi, Ji-Hwan Kim, Sung-Ho Bae and Tae-Gue Oh -- Strength, Drying Shrinkage, and Carbonation Characteristic of Amorphous Metallic -- Fiber-Reinforced Mortar with Artificial Lightweight Aggregate -- Reprinted from: Materials 2020, 13, 4451, doi:10.3390/ma13194451 351 -- Jungsoo Lee and Young Cheol Choi -- Pore Structure Characteristics of Foam Composite with Active Carbon -- Reprinted from: Materials 2020, 13, 4038, doi:10.3390/ma13184038 365.