Proceedings of the 4th Borobudur International Symposium on Science and Technology 2022 (BIS-STE 2022).

• Superior document: Advances in Engineering Research Series ; v.225
• Author: Setiyo, Muji.
• TeilnehmendeR: Pambuko, Zulfikar Bagus.; Praja, Chrisna Bagus Edhita.; Setiawan, Agus.; Yuliastuti, Fitriana.; Muliawanti, Lintang.; Dewi, Veni Soraya.
• Place / Publishing House: Dordrecht : : Atlantis Press (Zeger Karssen),, 2023.; Ã2023.
• Year of Publication: 2023
• Edition: 1st ed.
• Language: English
• Series: Advances in Engineering Research Series
• Physical Description: 1 online resource (904 pages)

Table of Contents

• Intro
• Preface
• Organization
• Contents
• Peer-Review Statements
• 1 REVIEW PROCEDURE
• 2 QUALITY CRITERIA
• 3 KEY METRICS
• 4 COMPETING INTERESTS
• 1 Introduction
• 2 Method
• 2.1 System Overview
• 2.2 Block Diagram Description
• 3 Result and Discussion
• 4 Conclusion
• Acknowledgements. We would like to thank P3M Banjarmasin State Polytechnic for incentive support for the publication of this paper, as well as colleagues and students from the Department of Automotive Engineering Technology who have assisted in the su...
• References
• Design of Rocket Stove with Computational Fluid Dynamics (CFD) Simulation
• The Impacts of Water Injection Application on the Performance of Internal Combustion Engines
• The Effect of Straw Mulch on Several Factors of Soil's Water Retaining Capacity During One Season of Upland Rice in Latosol Kemang, Bogor
• 1 Introduction
• 2 Method
• 3 Results and discussion
• 4 Conclusion
• References
• 1 Introduction
• 2 Method
• 3 Result and Discussion
• 4 Conclusion
• References
• 1 Introduction
• 2 Method
• 3 Results And Discussion
• 3.1 Failure Condition
• 3.2 Stress-strain Behavior
• 3.3 Influence of the concrete's strength and of the number of FRP layers
• 4 Conclusion
• Acknowledgements. The authors are grateful to Politeknik Negeri Kupang and would want to express their appreciation for the financial support that was provided for the work that was discussed in this publication. In addition, the authors would like to...
• References
• 1 Introduction
• 2 Method
• 2.1 Wastewater Characteristics
• 2.2 BOD5, COD and Pow analysis
• 2.3 Toxicity test LC50-96h on Brachydanio rerio
• 3 Result and Discussion
• 3.1 Correlation between Pow variability and BOD/COD ratio
• 3.2 Comparison of Artificial Wastewater with Wastewater in the Field.
• 3.3 Toxicity test LC50-96h on Brachydanio rerio
• 4 Conclusion
• Acknowledgments. The authors would like to thank all lecturers of the Department of Environmental Engineering, Faculty of Civil, Environmental, and Geo Engineering, Institut Teknologi Sepuluh Nopember for their suggestion and viewpoint. This research ...
• References
• Development of Bamboo Materials for Body Speed Boat Application
• References
• 3 Conclusion
• Acknowledgments. The authors thank for The Ministry of Education and Culture Republic of Indonesia for funding this research through PDUPT grant of 2022 with contract number of 1662/UN1/DITLIT/Dit-Lit/PT.01.03/2022.
• 2 Result
• 2.1 Nanoencapsulation Techniques
• Top-Down Techniques. Top-down technique, in which include liposome entrapment, emulsification, emulsification-solvent evaporation, melt extrusion, melt injection, extrusion coating, electro spraying, spray chilling, electrospinning, spinning disk and ...
• Bottom-Up Techniques. On the contrary to the top down technique, depends upon their natural properties, bottom-up deals with the formation of nano-size range material from the automatic/self-organization and self-assembly of atom by atom, molecule by ...
• 2.2 Bibliometric Analysis
• Design of the Real Time Image Capture Feature for Vegetable Production in Sharia Based E-Commerce
• References
• 2 Method
• 3 Result And Discussion
• 4 Conclusion
• Acknowledgments. This research is funded by Lembaga Penelitian dan Pengabdian Kepada Masyarakat (LPPM) of Sanata Dharma University.
• 1 Introduction
• 1.1 Theoretical review
• 1.2 Psychrometric
• 1.3 Vapor Compression
• References
• 3 Result And Discussion.
• 4 Conclusion
• Acknowledgments. The Authors would like to gratefully acknowledge that this research has been supported by the laboratory of pharmacy Universitas Muhammadiyah Surakarta.
• 2 Method
• 2.1 Research Design
• 2.2 Development Animals Test
• 2.3 Meemba Leaf Extraction and Application
• References
• 2 Methodology
• 3 Results and Discussion
• 4 Conclusion
• Acknowledgments. The authors acknowledged the financial support provided by Universitas Buana Perjuangan Karawang. This work was conducted as a part of the laboratory development in mechanical engineering study program.
• The "INOMARI" Android Application as a Model of Distance Learning Media for Vocational School
• 3 Result and Discussion
• 4 Conclusion
• References
• 2 Method
• 2.1 Distillation Model Specifications
• 2.2 Data Analysis
• The Study Calorific Value of Organic Briquettes for Optimizing Healthy Food Drying as an Alternative to Rainy Weather
• The Effect of The Capillarity on the Efficiency of Wick-Type Solar Energy Water Distillation
• Determination of Tsunami Evacuation Route using Dijkstra's Algorithm: Case Study of Batukaras, Indonesia
• References
• 2 Methods
• 3 Result and Discussion
• 4 Conclusion
• Acknowledgments. Special appreciation to LPPM Sebelas Maret University for funding this research, also the Engineering Materials Laboratory, Department of Mechanical Engineering, Faculty of Engineering, Sebelas Maret University, for facilitating this ...
• 4 Conclusion
• References
• 3 Result and Discussion
• 3.1 Constant Speed No Load
• 3.2 Constant Speed with Constant Load
• 3.3 Dynamic Speed with and Without Constant Load
• 3.4 Constant Speed with Load Disturbance
• 2 Method
• 2.1 Field Oriented Permanent Magnet Synchronous Motor (PMSM) Control
• 2.2 Space Vector Pulse Width Modulation (SVPWM)
• References
• 4 Conclusion
• Acknowledgments. This research is funded by the Department of Mechanical Engineering, Sanata Dharma University, Yogyakarta, Indonesia.
• 3 Result and Discussion.
• 3.1 Effect of nozzle diameter size on fluid outlet debit
• 3.2 Contour Pressure
• 3.3 Streamline Velocity
• 2 Method
• 2.1 2D Model
• 2.2 3D Model
• 2.3 Meshing Process
• 1 Introduction
• 3D Airlift Pump Simulation with Variation of Pipe Diameter Based on Computational Fluid Dynamics
• A Numerical Study of AL 2 O 3 -TIO2 Hybrid Nanofluid on Radiator Performance
• Maintenance Improvement Through Implementation of RCM and FMECA on Cooling Unit Radar System
• 4 Conclusion
• References
• 3 Results
• 3.1 Pre-processing
• 3.2 Prediction
• 2 Method
• 2.1 Data Recap
• 2.2 Pre-processing
• 2.3 Data classification
• 2.4 Application of the Algorithm
• 2.5 Research Framework
• Implementation of Project-Based Learning Model at Politeknik Negeri Medan
• References
• 4 Conclusion
• Acknowledgments. This research was funded by the Center for Research, Development, and Community Service, University of Muhammadiyah Magelang, mainly related to publication costs.
• 3 Result and Discussion
• 3.1 Result
• 3.2 Discussion
• 2 Method
• 2.1 Data Types and Sources
• 2.2 Population and Sample
• 2.3 Data Collection Methods
• 2.4 Data Analysis Techniques
• References
• 4 Conclusion
• Acknowledgement. We would like to express our thanks to all parties/ institutions that support this research, in particular appreciation was given to the Coordinator of Private Higher Education Region XVI in Gorontalo and Muhammadiyah University, Luwu...
• 3 Result and Discussion
• 3.1 Results
• Slump Test Testing. The Slump Test is the viscosity level of the concrete mixture which affects the construction process. Concrete slump is one of the important terms in construction.[4] The use of concrete for constructing a building itself must have.
• Compressive Strength Testing. The compressive strength test on the sample is carried out to obtain the maximum load. By using a test tool, namely Frashguand with a pressure capacity of 2000 kN. This test is carried out using 6 to 9 samples every week ...
• 3.2 Discussion
• Slump Test Testing
• Compressive Strength Testing
• 2 Method
• 2.1 Slump Test
• 2.2 Concrete Compressive Strength Test
• References
• 3 Result and Discussion
• 4 Conclusion
• Acknowledgments. This research is funded by an external grant from the Institute for Research and Community Service, Al-Irsyad Cilacap University.
• 2 Method
• 2.1 Mice model
• 2.2 Tools and materials
• 2.3 The research's procedures
• References
• 4 Conclusion
• Acknowledgement. This paper would not have been possible without the remarkable support from my both prominent supervisors, Dr. Fahimah binti Mohd. Razif and Assoc. Prof. Dr. Rahimin Affandi. Their support for this little part of my Ph.D. thesis have ...
• 2 Method
• 3 Result and Discussion
• 3.1 The Main Issues on Mortgage in Metaverse
• 3.2 Forecasting the Possibility of the Adapted-Meta Technology on Islamic Mortgage
• Carbopol-940 Improves the Physical Properties of Cocoa Peel Extract Emulgel
• References
• 4 Conclusion
• Acknowledgments. The authors express their gratitude for the scientific and technical support, as well as the access to facilities provided by the Basic Laboratory of Universitas Sumatera Utara, Advance Characterization Laboratories of National Resear...
• 2 Method
• 3 Results and Discussion
• 3.1 X-Ray Diffraction (XRD)
• 3.2 Scanning Electron Microscope (SEM)
• 551044_1_En_35_Chapter_OnlinePDF
• 2 Method
• 3 Results and Discussions
• 4 Conclusion
• References
• Design of Oxygen Generator Based on Oxymetry: Prototypes for Vergenios Baby.
• Characteristics of Mortar Composed of Crushed Solid Waste of Roof Tiles as Partial Replacement of Fine Aggregate.