Proceedings of the XV Ibero-American Congress of Mechanical Engineering : : Cibim 22 / Cibem 22.

• Author: Vizán Idoipe, Antonio.
• TeilnehmendeR: García Prada, Juan Carlos.
• Place / Publishing House: Cham : : Springer International Publishing AG,, 2023.; {copy}2023.
• Year of Publication: 2023
• Edition: 1st ed.
• Language: English
• Physical Description: 1 online resource (466 pages)

Table of Contents

• Intro
• Preface
• Organization
• Contents
• Mechanics
• Bayesian Inversion of a Non-linear Dynamic Model for Stockbridge Dampers
• 1 Introduction
• 2 Methodology
• 2.1 Experimental Test-Rig
• 2.2 Brief Description of the Predictive Deterministic Model
• 2.3 Brief Description of the Stochastic Approach
• 3 Casuistic Study and Results
• 4 Conclusions
• References
• Study and Optimization of a Numerical Algorithm for Hydrodynamic Lubrication Problems with Cavitation
• 1 Introduction
• 2 Methodology
• 2.1 Method of Characteristics
• 2.2 Bermúdez-Moreno Algorithm
• 2.3 Mass Conservation
• 3 Results
• 3.1 Model Validation
• 3.2 Convergence Study
• 3.3 Mass Conservation Study
• 4 Conclusions
• References
• Wake Interactions in an Asymmetric Binary Cylinder System in the Subcritical - Supercritical Regime
• 1 Introduction
• 2 Methodology
• 2.1 Water Tank
• 2.2 Wind Tunnel
• 3 Results
• 3.1 Single Cylinder
• 3.2 Binary System Wakes Measured in Water
• 3.3 Binary System Wakes Measured in Wind Tunnel
• 4 Conclusions
• References
• Contribution to Mathematical Modeling and Numerical Simulation of Welding Processes
• 1 Introduction
• 1.1 Welding Problem
• 2 Mathematical Modeling
• 2.1 Equations of Conservation of Mass and Momentum
• 2.2 Equation of Energy Conservation
• 3 Numerical Method
• 4 Results
• 5 Conclusions
• References
• Dimensionless Coefficients for Validation and Evaluation of a CFD Methodology Applied to a H-Darrieus Vertical Axis Wind Turbine
• 1 Introduction
• 2 Methodology
• 2.1 Computational Domain
• 2.2 Spatial Discretization
• 2.3 Modelling setup
• 3 Results and Discussion
• 4 Conclusions
• References
• Changes in Hardness and Volume of Polymers in Contact with Lubricants Used in Electric Vehicle Transmissions
• 1 Introduction
• 2 Materials y Methods
• 2.1 Materials.
• 2.2 Aging of Materials
• 2.3 Materials Characterization
• 2.4 Complementary Tests
• 3 Results
• 3.1 Volume Variation
• 3.2 Hardness Variation
• 3.3 Complementary Tests
• 4 Conclusions
• References
• Calculation of Williams-Landel Ferry Shift Factors via Probe Tack Testing for Uncured Prepreg Materials
• 1 Introduction
• 2 Method
• 2.1 Materials
• 2.2 Differential Scanning Calorimetry
• 2.3 Rheology
• 2.4 Adhesion Tests
• 3 Results
• 3.1 DSC
• 3.2 Rheology
• 3.3 Adhesion Tests
• 4 Conclusions
• References
• Modal Analysis of a 2R Flexible Platform Using Screw Theory
• 1 Introduction
• 2 Beam Element Derivation Using Screw Theory
• 3 Modal Analysis
• 4 Conclusions
• References
• OpenBeam: Off-Line and On-Line Tools to Solve Static Analysis of Mechanical Structures
• 1 Introduction
• 2 Methods
• 2.1 Direct Stiffness Matrix Method
• 2.2 Distributed Loads
• 2.3 Meshing
• 2.4 Eigen3 Library
• 2.5 MRPT-opengl Library
• 2.6 Emscripten
• 3 Results
• 3.1 The Openbeam C++ Library
• 3.2 Implemented Finite Elements
• 3.3 YAML Structure Definition Language
• 3.4 Applications
• 4 Conclusions
• References
• Failure Analysis of a Conveyor Belt Rail (Tripper) of Mineral
• 1 Introduction
• 2 Results and Analysis
• 2.1 Visual Inspection
• 2.2 Chemical Composition Analysis
• 2.3 Hardness Measurement
• 2.4 Metallographic Analysis
• 2.5 Micro Hardness Measurement
• 3 Conclusions
• References
• Vibration Analysis in Agricultural Vehicles for Fault Detection
• 1 Introduction
• 2 Methodology
• 2.1 Decision Tree
• 2.2 Obtaining Features
• 2.3 Extracted Characteristics
• 3 Results
• 3.1 Feature Analysis
• 4 Conclusion
• References
• Collaborative Project to Improve Teaching of Cams' Kinematic and Dynamic Analysis Using Spreadsheets
• 1 Introduction
• 2 Theoretical Basis on the Calculation of Cams.
• 2.1 Introduction, Working Principle, and Applications
• 2.2 Terminology and Classification of Cam Systems
• 2.3 Fundamental Law of Cam Design and Kinematic Diagrams
• 2.4 Follower Displacement Math Functions
• 2.5 Cam Size
• 3 Cam Profile Analysis and Design Validation
• 4 Computer Application Design
• 4.1 First Part: Kinematic Analysis
• 4.2 Second Part: Dynamic Analysis
• 4.3 Spreadsheets of Results
• 4.4 Technical Manual
• 5 Conclusions
• References
• Thermo-mechanical Stress Modeling of La(Fe,Co,Si)13 Thin Films Deposited on Porous Structures
• 1 Introduction
• 2 Computational Methods
• 2.1 Mathematical Model
• 2.2 Initial and Boundary Conditions
• 3 Results and Discussion
• 4 Conclusions
• References
• Isolation and Characterization of Crystalline Cellulose Nanofibers (CNF'S) from Guadua Angustifolia Kunth (GAK)
• 1 Introduction
• 2 Materials and Methods
• 2.1 Materials
• 2.2 Isolation of CNF'S
• 3 Characterization of Microfibers and Nanofibers
• 3.1 Atomic Force Microscopy (AFM)
• 3.2 Fourier Transform Infrared Spectroscopy (ATR-FTIR)
• 3.3 Thermogravimetric Analysis (TGA)
• 3.4 X-Ray Diffraction (XDR)
• 4 Results and Discussion
• 4.1 Morphology of CNFs
• 4.2 Removal of Non-cellulosic Elements (ATR-FTIR)
• 4.3 Thermogravimetric Analysis
• 4.4 Crystallinity Index (CrI)
• 5 Conclusions
• References
• Research into Novel Coatings on Composites and Technical Polymers, with Tailored Functionalities for the Transport and Biomedical Industries
• 1 Introduction
• 2 Methodology
• 2.1 Wire Arc Spray Process
• 2.2 Pre-treatment Selection
• 2.3 Pre-treatment Execution
• 3 Results
• 3.1 Mechanical Pre-treatment (Sand Blasting)
• 3.2 Laser Pre-treatment
• 3.3 Adhesion Test Results
• 4 Conclusions
• References
• Development of Virtual Tools for the Validation Study of Rigid Catenary Installations.
• 1 Introduction
• 2 Normative Framework
• 3 Simulation Tools Utility
• 4 Model Development for OCR
• 5 Model Validation
• 6 Conclusions
• References
• Assessment of Lower Limb Muscle Activation During Gait Assisted by a Cable-Actuated Exoskeleton
• 1 Introduction
• 2 Materials and Methods
• 2.1 Experimental Data
• 2.2 Dynamic Simulation
• 3 Results
• 3.1 Muscle Activations
• 3.2 Metabolic Cost
• 4 Discussion
• 5 Conclusion
• References
• Development of a Modular Test Bench for Cable-Driven Synergy-Based Exosuit Actuation and Control Strategies
• 1 Introduction
• 2 Methodology
• 2.1 Test Bench Design Theory
• 2.2 Construction of the Test Bench and its Modules
• 3 Tests Conducted
• 3.1 Motor Position Control
• 3.2 Analysis of Synergy Based Actuation Strategies
• 4 Results and Discussion
• 4.1 Adjusting Motor Position Control Parameters
• 4.2 Analysis of Synergy-Based Actuation
• 5 Conclusions
• References
• Biomechanical Study of the Addition of the Interferential Screw in the Repair of the Distal Biceps Brachii Tendon
• 1 Introduction
• 2 Methodology
• 2.1 Materials
• 2.2 Testing Protocol
• 2.3 Data Analysis
• 3 Results
• 4 Conclusions
• References
• Analysis of the Dorsolateral Prefrontal Cortex MNI Coordinates
• 1 Introduction
• 1.1 Dorsolateral Prefrontal Cortex (DLPFC)
• 1.2 Localization methods for DLPFC
• 2 Methodology
• 3 Results
• 3.1 Coordinates in MNI of the DLPFC
• 4 Conclusions
• References
• Vehicle Engineering
• Predictive Methodology to Optimize Knocking Behavior in the Transformation of Engines to Gaseous Fuels
• 1 Introduction
• 2 Methods and Materials
• 2.1 Materials
• 2.2 Methodology
• 3 Results
• 3.1 Knocking Zone
• 3.2 Experimental Results
• 4 Conclusions
• References
• Automatic Sight Distance Estimation for Overtaking Maneuvers
• 1 Introduction
• 2 Method
• 3 Results.
• 4 Conclusions
• References
• Assessing a Deterministic Model for Autonomous Driving Through Visual Behavior
• 1 Introduction
• 2 Driving Model
• 3 Experiments
• 3.1 Participants
• 3.2 Instrumentation
• 3.3 Procedure
• 4 Results
• 5 Conclusions
• References
• Tubular Structure of an Urban Electric Vehicle with High Crashworthiness Performance
• 1 Introduction
• 2 Methodology
• 2.1 Torsional and Bending Stiffness
• 2.2 Durability Tests
• 2.3 Crashworthiness Performance
• 3 Results
• 3.1 Torsional and Bending Stiffness
• 3.2 Durability Tests
• 3.3 Crashworthiness Performance
• 4 Conclusions
• References
• On the Use of Carbon Fiber Composites for the Enhancement of the Rollover Resistance of Steel Buses
• 1 Introduction
• 2 Methodology
• 2.1 Bending Collapse Experimental Setup
• 2.2 Concept Modeling of the Structure
• 3 Results
• 4 Conclusions
• References
• Numerical-Experimental Analysis of the Sealing Efficiency Utilizing Stresses Produced to an Engine Gasket Manufactured by CRS of ¼ Hardness with a Nitrile Coating on Both Sides
• 1 Introduction
• 2 Methodology for Performing Thermal Analysis
• 3 Solution and Results of Static Analysis with Thermal Loads
• 4 Conclusions
• References
• Low-Cost Model for the Estimation of Pollutant Emissions Based on GPS and Machine Learning
• 1 Introduction
• 2 Materials and Methods
• 2.1 Proposed Methodology
• 2.2 Data Collection in Real Driving Conditions
• 2.3 Test Routes
• 2.4 Estimation of Pollutants
• 3 Conclusions
• References
• Energy and Thermal Engineering
• Development of a Reactor Network Model to Predict Pollutant Emissions from Aviation Gas Turbines
• 1 Introduction
• 2 Methodology
• 3 Results
• 4 Conclusions
• References
• Electricity and Hydrogen Generation from Food and Vegetable Wastes - Technical and Economic Analysis
• 1 Introduction.
• 2 Methodology.