Nanotechnology in Construction for Circular Economy : : Proceedings of NICOM7, 31 October-02 November, 2022, Melbourne, Australia.
Saved in:
Superior document: | Lecture Notes in Civil Engineering Series ; v.356 |
---|---|
: | |
TeilnehmendeR: | |
Place / Publishing House: | Singapore : : Springer,, 2023. ©2023. |
Year of Publication: | 2023 |
Edition: | 1st ed. |
Language: | English |
Series: | Lecture Notes in Civil Engineering Series
|
Online Access: | |
Physical Description: | 1 online resource (525 pages) |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
id |
50030663105 |
---|---|
ctrlnum |
(MiAaPQ)50030663105 (Au-PeEL)EBL30663105 (OCoLC)1392082158 |
collection |
bib_alma |
record_format |
marc |
spelling |
Duan, Wenhui. Nanotechnology in Construction for Circular Economy : Proceedings of NICOM7, 31 October-02 November, 2022, Melbourne, Australia. 1st ed. Singapore : Springer, 2023. ©2023. 1 online resource (525 pages) text txt rdacontent computer c rdamedia online resource cr rdacarrier Lecture Notes in Civil Engineering Series ; v.356 Intro -- Organization -- NICOM7 Preface -- Contents -- Nonlinear Wind-Induced Vibration Behaviors of Multi-tower Suspension Bridges Under Strong Wind Conditions -- 1 Introduction -- 2 NAFM of Bridges -- 2.1 Three-Tower Suspension Bridge -- 2.2 2D Displacement Responses of the Closed-Box Girder -- 3 Nonlinear Flutter and Post-Flutter Behaviors of a Multi-tower Bridge -- 3.1 Turbulence Flow at Bridge Site -- 3.2 Flutter and Post-Flutter Behaviors Under Uniform Flow -- 3.3 Displacement Responses and Failure Modes Under Turbulent Flow -- 3.4 Comparison of Displacement Responses -- 4 Concluding Remarks -- References -- Thermal Transfer Effects of CRTS II Slab Track Under Various Meteorological Conditions -- 1 Introduction -- 2 Meteorological Parameter Collection -- 3 Heart Transfer Model -- 4 Conclusions -- References -- Investigation on Superhydrophobicity and Piezoresistivity of Self-sensing Cement-Based Sensors Using Silane Surface Treatment -- 1 Introduction -- 2 Methods -- 3 Results and Discussion -- 3.1 Hydrophobic Behavior -- 3.2 Piezoresistivity -- 4 Conclusions -- References -- Use of Brown Coal Ash as a Replacement of Cement in Concrete Masonry Bricks -- Composition of Alkali-Silica Reaction Products in Laboratory and Field Concrete -- 1 Introduction -- 2 Methods -- 2.1 ASR Testing as Per AMBT and SPSM -- 2.2 Analysis of the Composition of the ASR Products -- 3 Results and Discussion -- 4 Conclusions -- References -- Behavior of Hybrid Engineered Cementitious Composites Containing Nanocellulose -- 1 Introduction -- 2 Specimen Preparation -- 3 Results of Uniaxial Compression Test -- 4 Conclusions -- References -- Investigation of ASR Effects on the Load-Carrying Capacity of Reinforced Concrete Elements by Ultra-Accelerated Laboratory Test -- 1 Introduction -- 2 Methods -- 2.1 Materials and Mix Proportions. 2.2 Specimen Fabrication and Steam-Curing Procedure -- 2.3 Expansion Measurements -- 2.4 Mechanical Property Testing -- 2.5 Load Carrying Capacity Testing Under Four-Point Loading -- 3 Results and Discussion -- 3.1 Cracking of Specimens -- 3.2 Expansion of Concrete Prisms -- 3.3 Mechanical Properties of Concrete Under Accelerated ASR Test Conditions -- 3.4 Load Carrying Capacity of Reinforced Concrete Beams -- 4 Conclusions -- References -- 3D printed Ultra-High Performance Concrete: Preparation, Application, and Challenges -- 1 Introduction -- 2 Preparation of 3DP-UHPC -- 2.1 Design of UHPC for 3DCP -- 2.2 Manufacturing of 3DP-UHPC -- 2.3 Mechanical Anisotropy of 3DP-UHPC -- 3 Applications of 3DP-UHPC -- 3.1 Large-Scale Special Components -- 3.2 As the Reinforcement Materials -- 3.3 As Protection Against Explosion and Impact -- 4 Challenges of 3DP-UHPC -- 4.1 Standardization of Materials -- 4.2 Flexible Design of Structures -- 5 Summary and Outlook -- References -- Nanosilica-Modified Hydrogels Encapsulating Bacterial Spores for Self-healing Concrete -- 1 Introduction -- 2 Methods -- 2.1 Preparation of Bacterial Spores -- 2.2 Preparation of Hydrogels Encapsulating Bacterial Spores -- 2.3 Observation of Interface Between Hydrogel and Cement Matrix -- 2.4 Revival of Bacterial Spores Encapsulated in Hydrogels After Exposure to Alkali Environments -- 3 Results and Discussion -- 4 Conclusions -- References -- Reusing Alum Sludge as Cement Replacement to Develop Eco-Friendly Concrete Products -- 1 Introduction -- 2 Methodology -- 2.1 Materials -- 2.2 Sample Preparation -- 2.3 Experimental Methods -- 3 Results and Discussion -- 3.1 Material Characterization -- 3.2 Reaction Degree and Hydration Mechanism of Sludge -- 3.3 Chemo-Mechanical Properties of Pastes and Strength of Blocks -- 4 Conclusions -- References. Role of Aggregate Reactivity, Binder Composition, and Curing Temperature on the Delayed Ettringite Formation and Associated Durability Loss in Concrete -- 1 Introduction -- 1.1 Project Outline -- 2 Methods -- 3 Results and Discussion -- 3.1 DEF in Concrete -- 3.2 ASR-DEF in Concrete -- 4 Conclusions -- References -- Effect of Blending Alum Sludge and Ground Granulated Blast-Furnace Slag as Cement Replacement to Mitigate Alkali-Silica Reaction -- 1 Introduction -- 2 Methods -- 2.1 Materials -- 2.2 Experimental Protocol -- 3 Results and Discussion -- 3.1 Compressive Strength -- 3.2 ASR-Induced Expansion -- 3.3 Phase Analysis of the Mortars -- 3.4 Microstructural Characteristics and Elemental Analysis -- 4 Conclusions -- References -- Optimisation of Limestone Calcined Clay Cement Based on Response Surface Method -- 1 Introduction -- 2 Methods -- 2.1 Materials -- 2.2 Design of Mixtures -- 3 Mathematical Modelling and Statistical Analysis -- 3.1 ANOVA and Adequacy Checking -- 3.2 Interaction Effects on Response -- 3.3 Response Surface Optimization Analysis -- 4 Conclusion -- References -- Designing Waterborne Protective Coatings Through Manipulating the Nanostructure of Acrylic-Based Nanocomposites -- 1 Introduction -- 2 Methods -- 2.1 Materials -- 2.2 Preparation of Waterborne Acrylic Copolymer, Acrylic-Based Coatings and Coating Films -- 2.3 Characterization -- 3 Results and Discussion -- 3.1 Enhanced UV Protection Through the Formation of an Acrylic-Based Nanocomposite -- 3.2 Enhanced Corrosion Resistance of Acrylic-Alkyd Coating with Worm-Like Nanostructure -- 3.3 Multifunctional Acrylic-PDMS Coating with Spherical-Like Nanostructure -- 4 Conclusion -- 5 Data Availability Statement -- References -- Analysis of Categories That Delay Global Construction Projects -- 1 Introduction -- 2 Literature Review -- 3 Research Method. 3.1 Research Scope and Select Studies -- 3.2 Factors Identified and Classification into Categories -- 3.3 Analysis of Factor Categories -- 4 Results and Discussion -- 5 Conclusion -- References -- Chloride Penetration in Low-Carbon Concrete with High Volume of SCM: A Review Study -- 1 Introduction -- 2 Chloride Penetration in LCC -- 2.1 Effect of SCM Content on Diffusion Coefficients -- 2.2 Effect of Curing Conditions on Chloride Penetration -- 2.3 Effect of Test Methods on Chloride Penetration -- 3 Conclusions -- References -- A Compact Review on the Waste-Based Lightweight Concrete: Advancement and Possibilities -- 1 Introduction -- 2 Lightweight Aggregate Concrete (LWAC) -- 3 Structural Bond Behavior of LWC -- 4 State of the Art -- 5 Possibilities -- 6 Conclusions -- References -- Influence of Reinforcement on the Loading Capacity of Geopolymer Concrete Pipe -- 1 Introduction -- 2 FE Modelling of TEB Test -- 3 Material Modelling -- 4 Load-Deflection Behavior of Concrete Pipes -- 5 Effect of Change in Reinforcement Area -- 6 Conclusion -- References -- Creep of Slag Blended Cement Concrete with and Without Activator -- 1 Introduction -- 2 Experiments -- 2.1 Mixture Proportions and Properties -- 2.2 Creep Test Setup -- 3 Creep Model in AS3600:2018 -- 4 Results and Discussion -- 4.1 Total Deformation -- 4.2 Creep Strain Measurement and Model Prediction -- 5 Conclusions -- References -- Partially-Unzipped Carbon Nanotubes as Low-Concentration Amendment for Cement Paste -- 1 Introduction -- 2 Methods -- 2.1 PUCNT Aqueous Suspensions -- 2.2 Cement Paste Specimens -- 2.3 Procedure -- 3 Results and Discussion -- 3.1 Dispersibility in Aqueous Suspension -- 3.2 Compressive Strength -- 4 Conclusions -- References -- Effect of Fine Aggregates and Test Settings on the Self-sensing Response of Cement-Based Composites with Carbon Nanotubes as Conductive Filler. 1 Introduction -- 2 Methods -- 2.1 Materials and Sample Preparation -- 2.2 Self-sensing Test -- 3 Results and Discussion -- 3.1 Materials Characterization -- 3.2 Effect of Fine Aggregate and CNT Content on Electrical and Piezoresistive Properties -- 3.3 Effect of Test Setup on Electrical and Piezoresistive Properties -- 4 Conclusions -- References -- Effect of Carbonation on the Microstructure and Phase Development of High-Slag Binders -- 1 Introduction -- 2 Methods -- 2.1 Raw Materials -- 2.2 Carbonation Test -- 2.3 Characterization of the Mortars -- 3 Results and Discussion -- 4 Conclusions -- References -- A New Dispersion Strategy to Achieve High Performance Graphene-Based Cement Material -- 1 Introduction -- 2 Methods -- 2.1 Materials -- 2.2 Sample Preparation -- 2.3 Experimental Methods -- 3 Results and Discussion -- 3.1 Characterization of GC Material -- 3.2 Mechanical Properties of GC Material -- 3.3 Dispersion Effect -- 4 Conclusions -- References -- Accelerated Mortar Bar Test to Assess the Effect of Alkali Concentration on the Alkali-Silica Reaction -- 1 Introduction -- 2 Methods -- 3 Results and Discussion -- 4 Conclusions -- References -- Development of High-Strength Light-Weight Cementitious Composites with Hollow Glass Microspheres -- 1 Introduction -- 2 Methods -- 2.1 Raw Materials -- 2.2 Mix Proportions -- 2.3 Experimental Methods -- 3 Results and Discussion -- 3.1 Density, Strength and Structural Efficiency -- 3.2 SEM Analysis -- 4 Conclusions -- References -- Co-effects of Graphene Oxide and Silica Fume on the Rheological Properties of Cement Paste -- 1 Introduction -- 2 Methods -- 2.1 Materials -- 2.2 Preparation of GO-Coated SF and Cement Paste -- 2.3 Testing Methods -- 3 Results and Discussion -- 3.1 Evaluation of the Surface Properties of MSF Particles and the MSF@GO -- 3.2 Rheological Properties -- 4 Conclusions -- References. Automated 3D-Printer Maintenance and Part Removal by Robotic Arms. Description based on publisher supplied metadata and other sources. Electronic reproduction. Ann Arbor, Michigan : ProQuest Ebook Central, 2024. Available via World Wide Web. Access may be limited to ProQuest Ebook Central affiliated libraries. Electronic books. Zhang, Lihai. Shah, Surendra P. Print version: Duan, Wenhui Nanotechnology in Construction for Circular Economy Singapore : Springer,c2023 9789819933297 ProQuest (Firm) Lecture Notes in Civil Engineering Series https://ebookcentral.proquest.com/lib/oeawat/detail.action?docID=30663105 Click to View |
language |
English |
format |
eBook |
author |
Duan, Wenhui. |
spellingShingle |
Duan, Wenhui. Nanotechnology in Construction for Circular Economy : Proceedings of NICOM7, 31 October-02 November, 2022, Melbourne, Australia. Lecture Notes in Civil Engineering Series ; Intro -- Organization -- NICOM7 Preface -- Contents -- Nonlinear Wind-Induced Vibration Behaviors of Multi-tower Suspension Bridges Under Strong Wind Conditions -- 1 Introduction -- 2 NAFM of Bridges -- 2.1 Three-Tower Suspension Bridge -- 2.2 2D Displacement Responses of the Closed-Box Girder -- 3 Nonlinear Flutter and Post-Flutter Behaviors of a Multi-tower Bridge -- 3.1 Turbulence Flow at Bridge Site -- 3.2 Flutter and Post-Flutter Behaviors Under Uniform Flow -- 3.3 Displacement Responses and Failure Modes Under Turbulent Flow -- 3.4 Comparison of Displacement Responses -- 4 Concluding Remarks -- References -- Thermal Transfer Effects of CRTS II Slab Track Under Various Meteorological Conditions -- 1 Introduction -- 2 Meteorological Parameter Collection -- 3 Heart Transfer Model -- 4 Conclusions -- References -- Investigation on Superhydrophobicity and Piezoresistivity of Self-sensing Cement-Based Sensors Using Silane Surface Treatment -- 1 Introduction -- 2 Methods -- 3 Results and Discussion -- 3.1 Hydrophobic Behavior -- 3.2 Piezoresistivity -- 4 Conclusions -- References -- Use of Brown Coal Ash as a Replacement of Cement in Concrete Masonry Bricks -- Composition of Alkali-Silica Reaction Products in Laboratory and Field Concrete -- 1 Introduction -- 2 Methods -- 2.1 ASR Testing as Per AMBT and SPSM -- 2.2 Analysis of the Composition of the ASR Products -- 3 Results and Discussion -- 4 Conclusions -- References -- Behavior of Hybrid Engineered Cementitious Composites Containing Nanocellulose -- 1 Introduction -- 2 Specimen Preparation -- 3 Results of Uniaxial Compression Test -- 4 Conclusions -- References -- Investigation of ASR Effects on the Load-Carrying Capacity of Reinforced Concrete Elements by Ultra-Accelerated Laboratory Test -- 1 Introduction -- 2 Methods -- 2.1 Materials and Mix Proportions. 2.2 Specimen Fabrication and Steam-Curing Procedure -- 2.3 Expansion Measurements -- 2.4 Mechanical Property Testing -- 2.5 Load Carrying Capacity Testing Under Four-Point Loading -- 3 Results and Discussion -- 3.1 Cracking of Specimens -- 3.2 Expansion of Concrete Prisms -- 3.3 Mechanical Properties of Concrete Under Accelerated ASR Test Conditions -- 3.4 Load Carrying Capacity of Reinforced Concrete Beams -- 4 Conclusions -- References -- 3D printed Ultra-High Performance Concrete: Preparation, Application, and Challenges -- 1 Introduction -- 2 Preparation of 3DP-UHPC -- 2.1 Design of UHPC for 3DCP -- 2.2 Manufacturing of 3DP-UHPC -- 2.3 Mechanical Anisotropy of 3DP-UHPC -- 3 Applications of 3DP-UHPC -- 3.1 Large-Scale Special Components -- 3.2 As the Reinforcement Materials -- 3.3 As Protection Against Explosion and Impact -- 4 Challenges of 3DP-UHPC -- 4.1 Standardization of Materials -- 4.2 Flexible Design of Structures -- 5 Summary and Outlook -- References -- Nanosilica-Modified Hydrogels Encapsulating Bacterial Spores for Self-healing Concrete -- 1 Introduction -- 2 Methods -- 2.1 Preparation of Bacterial Spores -- 2.2 Preparation of Hydrogels Encapsulating Bacterial Spores -- 2.3 Observation of Interface Between Hydrogel and Cement Matrix -- 2.4 Revival of Bacterial Spores Encapsulated in Hydrogels After Exposure to Alkali Environments -- 3 Results and Discussion -- 4 Conclusions -- References -- Reusing Alum Sludge as Cement Replacement to Develop Eco-Friendly Concrete Products -- 1 Introduction -- 2 Methodology -- 2.1 Materials -- 2.2 Sample Preparation -- 2.3 Experimental Methods -- 3 Results and Discussion -- 3.1 Material Characterization -- 3.2 Reaction Degree and Hydration Mechanism of Sludge -- 3.3 Chemo-Mechanical Properties of Pastes and Strength of Blocks -- 4 Conclusions -- References. Role of Aggregate Reactivity, Binder Composition, and Curing Temperature on the Delayed Ettringite Formation and Associated Durability Loss in Concrete -- 1 Introduction -- 1.1 Project Outline -- 2 Methods -- 3 Results and Discussion -- 3.1 DEF in Concrete -- 3.2 ASR-DEF in Concrete -- 4 Conclusions -- References -- Effect of Blending Alum Sludge and Ground Granulated Blast-Furnace Slag as Cement Replacement to Mitigate Alkali-Silica Reaction -- 1 Introduction -- 2 Methods -- 2.1 Materials -- 2.2 Experimental Protocol -- 3 Results and Discussion -- 3.1 Compressive Strength -- 3.2 ASR-Induced Expansion -- 3.3 Phase Analysis of the Mortars -- 3.4 Microstructural Characteristics and Elemental Analysis -- 4 Conclusions -- References -- Optimisation of Limestone Calcined Clay Cement Based on Response Surface Method -- 1 Introduction -- 2 Methods -- 2.1 Materials -- 2.2 Design of Mixtures -- 3 Mathematical Modelling and Statistical Analysis -- 3.1 ANOVA and Adequacy Checking -- 3.2 Interaction Effects on Response -- 3.3 Response Surface Optimization Analysis -- 4 Conclusion -- References -- Designing Waterborne Protective Coatings Through Manipulating the Nanostructure of Acrylic-Based Nanocomposites -- 1 Introduction -- 2 Methods -- 2.1 Materials -- 2.2 Preparation of Waterborne Acrylic Copolymer, Acrylic-Based Coatings and Coating Films -- 2.3 Characterization -- 3 Results and Discussion -- 3.1 Enhanced UV Protection Through the Formation of an Acrylic-Based Nanocomposite -- 3.2 Enhanced Corrosion Resistance of Acrylic-Alkyd Coating with Worm-Like Nanostructure -- 3.3 Multifunctional Acrylic-PDMS Coating with Spherical-Like Nanostructure -- 4 Conclusion -- 5 Data Availability Statement -- References -- Analysis of Categories That Delay Global Construction Projects -- 1 Introduction -- 2 Literature Review -- 3 Research Method. 3.1 Research Scope and Select Studies -- 3.2 Factors Identified and Classification into Categories -- 3.3 Analysis of Factor Categories -- 4 Results and Discussion -- 5 Conclusion -- References -- Chloride Penetration in Low-Carbon Concrete with High Volume of SCM: A Review Study -- 1 Introduction -- 2 Chloride Penetration in LCC -- 2.1 Effect of SCM Content on Diffusion Coefficients -- 2.2 Effect of Curing Conditions on Chloride Penetration -- 2.3 Effect of Test Methods on Chloride Penetration -- 3 Conclusions -- References -- A Compact Review on the Waste-Based Lightweight Concrete: Advancement and Possibilities -- 1 Introduction -- 2 Lightweight Aggregate Concrete (LWAC) -- 3 Structural Bond Behavior of LWC -- 4 State of the Art -- 5 Possibilities -- 6 Conclusions -- References -- Influence of Reinforcement on the Loading Capacity of Geopolymer Concrete Pipe -- 1 Introduction -- 2 FE Modelling of TEB Test -- 3 Material Modelling -- 4 Load-Deflection Behavior of Concrete Pipes -- 5 Effect of Change in Reinforcement Area -- 6 Conclusion -- References -- Creep of Slag Blended Cement Concrete with and Without Activator -- 1 Introduction -- 2 Experiments -- 2.1 Mixture Proportions and Properties -- 2.2 Creep Test Setup -- 3 Creep Model in AS3600:2018 -- 4 Results and Discussion -- 4.1 Total Deformation -- 4.2 Creep Strain Measurement and Model Prediction -- 5 Conclusions -- References -- Partially-Unzipped Carbon Nanotubes as Low-Concentration Amendment for Cement Paste -- 1 Introduction -- 2 Methods -- 2.1 PUCNT Aqueous Suspensions -- 2.2 Cement Paste Specimens -- 2.3 Procedure -- 3 Results and Discussion -- 3.1 Dispersibility in Aqueous Suspension -- 3.2 Compressive Strength -- 4 Conclusions -- References -- Effect of Fine Aggregates and Test Settings on the Self-sensing Response of Cement-Based Composites with Carbon Nanotubes as Conductive Filler. 1 Introduction -- 2 Methods -- 2.1 Materials and Sample Preparation -- 2.2 Self-sensing Test -- 3 Results and Discussion -- 3.1 Materials Characterization -- 3.2 Effect of Fine Aggregate and CNT Content on Electrical and Piezoresistive Properties -- 3.3 Effect of Test Setup on Electrical and Piezoresistive Properties -- 4 Conclusions -- References -- Effect of Carbonation on the Microstructure and Phase Development of High-Slag Binders -- 1 Introduction -- 2 Methods -- 2.1 Raw Materials -- 2.2 Carbonation Test -- 2.3 Characterization of the Mortars -- 3 Results and Discussion -- 4 Conclusions -- References -- A New Dispersion Strategy to Achieve High Performance Graphene-Based Cement Material -- 1 Introduction -- 2 Methods -- 2.1 Materials -- 2.2 Sample Preparation -- 2.3 Experimental Methods -- 3 Results and Discussion -- 3.1 Characterization of GC Material -- 3.2 Mechanical Properties of GC Material -- 3.3 Dispersion Effect -- 4 Conclusions -- References -- Accelerated Mortar Bar Test to Assess the Effect of Alkali Concentration on the Alkali-Silica Reaction -- 1 Introduction -- 2 Methods -- 3 Results and Discussion -- 4 Conclusions -- References -- Development of High-Strength Light-Weight Cementitious Composites with Hollow Glass Microspheres -- 1 Introduction -- 2 Methods -- 2.1 Raw Materials -- 2.2 Mix Proportions -- 2.3 Experimental Methods -- 3 Results and Discussion -- 3.1 Density, Strength and Structural Efficiency -- 3.2 SEM Analysis -- 4 Conclusions -- References -- Co-effects of Graphene Oxide and Silica Fume on the Rheological Properties of Cement Paste -- 1 Introduction -- 2 Methods -- 2.1 Materials -- 2.2 Preparation of GO-Coated SF and Cement Paste -- 2.3 Testing Methods -- 3 Results and Discussion -- 3.1 Evaluation of the Surface Properties of MSF Particles and the MSF@GO -- 3.2 Rheological Properties -- 4 Conclusions -- References. Automated 3D-Printer Maintenance and Part Removal by Robotic Arms. |
author_facet |
Duan, Wenhui. Zhang, Lihai. Shah, Surendra P. |
author_variant |
w d wd |
author2 |
Zhang, Lihai. Shah, Surendra P. |
author2_variant |
l z lz s p s sp sps |
author2_role |
TeilnehmendeR TeilnehmendeR |
author_sort |
Duan, Wenhui. |
title |
Nanotechnology in Construction for Circular Economy : Proceedings of NICOM7, 31 October-02 November, 2022, Melbourne, Australia. |
title_sub |
Proceedings of NICOM7, 31 October-02 November, 2022, Melbourne, Australia. |
title_full |
Nanotechnology in Construction for Circular Economy : Proceedings of NICOM7, 31 October-02 November, 2022, Melbourne, Australia. |
title_fullStr |
Nanotechnology in Construction for Circular Economy : Proceedings of NICOM7, 31 October-02 November, 2022, Melbourne, Australia. |
title_full_unstemmed |
Nanotechnology in Construction for Circular Economy : Proceedings of NICOM7, 31 October-02 November, 2022, Melbourne, Australia. |
title_auth |
Nanotechnology in Construction for Circular Economy : Proceedings of NICOM7, 31 October-02 November, 2022, Melbourne, Australia. |
title_new |
Nanotechnology in Construction for Circular Economy : |
title_sort |
nanotechnology in construction for circular economy : proceedings of nicom7, 31 october-02 november, 2022, melbourne, australia. |
series |
Lecture Notes in Civil Engineering Series ; |
series2 |
Lecture Notes in Civil Engineering Series ; |
publisher |
Springer, |
publishDate |
2023 |
physical |
1 online resource (525 pages) |
edition |
1st ed. |
contents |
Intro -- Organization -- NICOM7 Preface -- Contents -- Nonlinear Wind-Induced Vibration Behaviors of Multi-tower Suspension Bridges Under Strong Wind Conditions -- 1 Introduction -- 2 NAFM of Bridges -- 2.1 Three-Tower Suspension Bridge -- 2.2 2D Displacement Responses of the Closed-Box Girder -- 3 Nonlinear Flutter and Post-Flutter Behaviors of a Multi-tower Bridge -- 3.1 Turbulence Flow at Bridge Site -- 3.2 Flutter and Post-Flutter Behaviors Under Uniform Flow -- 3.3 Displacement Responses and Failure Modes Under Turbulent Flow -- 3.4 Comparison of Displacement Responses -- 4 Concluding Remarks -- References -- Thermal Transfer Effects of CRTS II Slab Track Under Various Meteorological Conditions -- 1 Introduction -- 2 Meteorological Parameter Collection -- 3 Heart Transfer Model -- 4 Conclusions -- References -- Investigation on Superhydrophobicity and Piezoresistivity of Self-sensing Cement-Based Sensors Using Silane Surface Treatment -- 1 Introduction -- 2 Methods -- 3 Results and Discussion -- 3.1 Hydrophobic Behavior -- 3.2 Piezoresistivity -- 4 Conclusions -- References -- Use of Brown Coal Ash as a Replacement of Cement in Concrete Masonry Bricks -- Composition of Alkali-Silica Reaction Products in Laboratory and Field Concrete -- 1 Introduction -- 2 Methods -- 2.1 ASR Testing as Per AMBT and SPSM -- 2.2 Analysis of the Composition of the ASR Products -- 3 Results and Discussion -- 4 Conclusions -- References -- Behavior of Hybrid Engineered Cementitious Composites Containing Nanocellulose -- 1 Introduction -- 2 Specimen Preparation -- 3 Results of Uniaxial Compression Test -- 4 Conclusions -- References -- Investigation of ASR Effects on the Load-Carrying Capacity of Reinforced Concrete Elements by Ultra-Accelerated Laboratory Test -- 1 Introduction -- 2 Methods -- 2.1 Materials and Mix Proportions. 2.2 Specimen Fabrication and Steam-Curing Procedure -- 2.3 Expansion Measurements -- 2.4 Mechanical Property Testing -- 2.5 Load Carrying Capacity Testing Under Four-Point Loading -- 3 Results and Discussion -- 3.1 Cracking of Specimens -- 3.2 Expansion of Concrete Prisms -- 3.3 Mechanical Properties of Concrete Under Accelerated ASR Test Conditions -- 3.4 Load Carrying Capacity of Reinforced Concrete Beams -- 4 Conclusions -- References -- 3D printed Ultra-High Performance Concrete: Preparation, Application, and Challenges -- 1 Introduction -- 2 Preparation of 3DP-UHPC -- 2.1 Design of UHPC for 3DCP -- 2.2 Manufacturing of 3DP-UHPC -- 2.3 Mechanical Anisotropy of 3DP-UHPC -- 3 Applications of 3DP-UHPC -- 3.1 Large-Scale Special Components -- 3.2 As the Reinforcement Materials -- 3.3 As Protection Against Explosion and Impact -- 4 Challenges of 3DP-UHPC -- 4.1 Standardization of Materials -- 4.2 Flexible Design of Structures -- 5 Summary and Outlook -- References -- Nanosilica-Modified Hydrogels Encapsulating Bacterial Spores for Self-healing Concrete -- 1 Introduction -- 2 Methods -- 2.1 Preparation of Bacterial Spores -- 2.2 Preparation of Hydrogels Encapsulating Bacterial Spores -- 2.3 Observation of Interface Between Hydrogel and Cement Matrix -- 2.4 Revival of Bacterial Spores Encapsulated in Hydrogels After Exposure to Alkali Environments -- 3 Results and Discussion -- 4 Conclusions -- References -- Reusing Alum Sludge as Cement Replacement to Develop Eco-Friendly Concrete Products -- 1 Introduction -- 2 Methodology -- 2.1 Materials -- 2.2 Sample Preparation -- 2.3 Experimental Methods -- 3 Results and Discussion -- 3.1 Material Characterization -- 3.2 Reaction Degree and Hydration Mechanism of Sludge -- 3.3 Chemo-Mechanical Properties of Pastes and Strength of Blocks -- 4 Conclusions -- References. Role of Aggregate Reactivity, Binder Composition, and Curing Temperature on the Delayed Ettringite Formation and Associated Durability Loss in Concrete -- 1 Introduction -- 1.1 Project Outline -- 2 Methods -- 3 Results and Discussion -- 3.1 DEF in Concrete -- 3.2 ASR-DEF in Concrete -- 4 Conclusions -- References -- Effect of Blending Alum Sludge and Ground Granulated Blast-Furnace Slag as Cement Replacement to Mitigate Alkali-Silica Reaction -- 1 Introduction -- 2 Methods -- 2.1 Materials -- 2.2 Experimental Protocol -- 3 Results and Discussion -- 3.1 Compressive Strength -- 3.2 ASR-Induced Expansion -- 3.3 Phase Analysis of the Mortars -- 3.4 Microstructural Characteristics and Elemental Analysis -- 4 Conclusions -- References -- Optimisation of Limestone Calcined Clay Cement Based on Response Surface Method -- 1 Introduction -- 2 Methods -- 2.1 Materials -- 2.2 Design of Mixtures -- 3 Mathematical Modelling and Statistical Analysis -- 3.1 ANOVA and Adequacy Checking -- 3.2 Interaction Effects on Response -- 3.3 Response Surface Optimization Analysis -- 4 Conclusion -- References -- Designing Waterborne Protective Coatings Through Manipulating the Nanostructure of Acrylic-Based Nanocomposites -- 1 Introduction -- 2 Methods -- 2.1 Materials -- 2.2 Preparation of Waterborne Acrylic Copolymer, Acrylic-Based Coatings and Coating Films -- 2.3 Characterization -- 3 Results and Discussion -- 3.1 Enhanced UV Protection Through the Formation of an Acrylic-Based Nanocomposite -- 3.2 Enhanced Corrosion Resistance of Acrylic-Alkyd Coating with Worm-Like Nanostructure -- 3.3 Multifunctional Acrylic-PDMS Coating with Spherical-Like Nanostructure -- 4 Conclusion -- 5 Data Availability Statement -- References -- Analysis of Categories That Delay Global Construction Projects -- 1 Introduction -- 2 Literature Review -- 3 Research Method. 3.1 Research Scope and Select Studies -- 3.2 Factors Identified and Classification into Categories -- 3.3 Analysis of Factor Categories -- 4 Results and Discussion -- 5 Conclusion -- References -- Chloride Penetration in Low-Carbon Concrete with High Volume of SCM: A Review Study -- 1 Introduction -- 2 Chloride Penetration in LCC -- 2.1 Effect of SCM Content on Diffusion Coefficients -- 2.2 Effect of Curing Conditions on Chloride Penetration -- 2.3 Effect of Test Methods on Chloride Penetration -- 3 Conclusions -- References -- A Compact Review on the Waste-Based Lightweight Concrete: Advancement and Possibilities -- 1 Introduction -- 2 Lightweight Aggregate Concrete (LWAC) -- 3 Structural Bond Behavior of LWC -- 4 State of the Art -- 5 Possibilities -- 6 Conclusions -- References -- Influence of Reinforcement on the Loading Capacity of Geopolymer Concrete Pipe -- 1 Introduction -- 2 FE Modelling of TEB Test -- 3 Material Modelling -- 4 Load-Deflection Behavior of Concrete Pipes -- 5 Effect of Change in Reinforcement Area -- 6 Conclusion -- References -- Creep of Slag Blended Cement Concrete with and Without Activator -- 1 Introduction -- 2 Experiments -- 2.1 Mixture Proportions and Properties -- 2.2 Creep Test Setup -- 3 Creep Model in AS3600:2018 -- 4 Results and Discussion -- 4.1 Total Deformation -- 4.2 Creep Strain Measurement and Model Prediction -- 5 Conclusions -- References -- Partially-Unzipped Carbon Nanotubes as Low-Concentration Amendment for Cement Paste -- 1 Introduction -- 2 Methods -- 2.1 PUCNT Aqueous Suspensions -- 2.2 Cement Paste Specimens -- 2.3 Procedure -- 3 Results and Discussion -- 3.1 Dispersibility in Aqueous Suspension -- 3.2 Compressive Strength -- 4 Conclusions -- References -- Effect of Fine Aggregates and Test Settings on the Self-sensing Response of Cement-Based Composites with Carbon Nanotubes as Conductive Filler. 1 Introduction -- 2 Methods -- 2.1 Materials and Sample Preparation -- 2.2 Self-sensing Test -- 3 Results and Discussion -- 3.1 Materials Characterization -- 3.2 Effect of Fine Aggregate and CNT Content on Electrical and Piezoresistive Properties -- 3.3 Effect of Test Setup on Electrical and Piezoresistive Properties -- 4 Conclusions -- References -- Effect of Carbonation on the Microstructure and Phase Development of High-Slag Binders -- 1 Introduction -- 2 Methods -- 2.1 Raw Materials -- 2.2 Carbonation Test -- 2.3 Characterization of the Mortars -- 3 Results and Discussion -- 4 Conclusions -- References -- A New Dispersion Strategy to Achieve High Performance Graphene-Based Cement Material -- 1 Introduction -- 2 Methods -- 2.1 Materials -- 2.2 Sample Preparation -- 2.3 Experimental Methods -- 3 Results and Discussion -- 3.1 Characterization of GC Material -- 3.2 Mechanical Properties of GC Material -- 3.3 Dispersion Effect -- 4 Conclusions -- References -- Accelerated Mortar Bar Test to Assess the Effect of Alkali Concentration on the Alkali-Silica Reaction -- 1 Introduction -- 2 Methods -- 3 Results and Discussion -- 4 Conclusions -- References -- Development of High-Strength Light-Weight Cementitious Composites with Hollow Glass Microspheres -- 1 Introduction -- 2 Methods -- 2.1 Raw Materials -- 2.2 Mix Proportions -- 2.3 Experimental Methods -- 3 Results and Discussion -- 3.1 Density, Strength and Structural Efficiency -- 3.2 SEM Analysis -- 4 Conclusions -- References -- Co-effects of Graphene Oxide and Silica Fume on the Rheological Properties of Cement Paste -- 1 Introduction -- 2 Methods -- 2.1 Materials -- 2.2 Preparation of GO-Coated SF and Cement Paste -- 2.3 Testing Methods -- 3 Results and Discussion -- 3.1 Evaluation of the Surface Properties of MSF Particles and the MSF@GO -- 3.2 Rheological Properties -- 4 Conclusions -- References. Automated 3D-Printer Maintenance and Part Removal by Robotic Arms. |
isbn |
9789819933303 9789819933297 |
callnumber-first |
T - Technology |
callnumber-subject |
T - General Technology |
callnumber-label |
T174 |
callnumber-sort |
T 3174.7 |
genre |
Electronic books. |
genre_facet |
Electronic books. |
url |
https://ebookcentral.proquest.com/lib/oeawat/detail.action?docID=30663105 |
illustrated |
Not Illustrated |
oclc_num |
1392082158 |
work_keys_str_mv |
AT duanwenhui nanotechnologyinconstructionforcirculareconomyproceedingsofnicom731october02november2022melbourneaustralia AT zhanglihai nanotechnologyinconstructionforcirculareconomyproceedingsofnicom731october02november2022melbourneaustralia AT shahsurendrap nanotechnologyinconstructionforcirculareconomyproceedingsofnicom731october02november2022melbourneaustralia |
status_str |
n |
ids_txt_mv |
(MiAaPQ)50030663105 (Au-PeEL)EBL30663105 (OCoLC)1392082158 |
carrierType_str_mv |
cr |
hierarchy_parent_title |
Lecture Notes in Civil Engineering Series ; v.356 |
is_hierarchy_title |
Nanotechnology in Construction for Circular Economy : Proceedings of NICOM7, 31 October-02 November, 2022, Melbourne, Australia. |
container_title |
Lecture Notes in Civil Engineering Series ; v.356 |
author2_original_writing_str_mv |
noLinkedField noLinkedField |
marc_error |
Info : MARC8 translation shorter than ISO-8859-1, choosing MARC8. --- [ 856 : z ] |
_version_ |
1792331071349587968 |
fullrecord |
<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>12179nam a22004813i 4500</leader><controlfield tag="001">50030663105</controlfield><controlfield tag="003">MiAaPQ</controlfield><controlfield tag="005">20240229073851.0</controlfield><controlfield tag="006">m o d | </controlfield><controlfield tag="007">cr cnu||||||||</controlfield><controlfield tag="008">240229s2023 xx o ||||0 eng d</controlfield><datafield tag="020" ind1=" " ind2=" "><subfield code="a">9789819933303</subfield><subfield code="q">(electronic bk.)</subfield></datafield><datafield tag="020" ind1=" " ind2=" "><subfield code="z">9789819933297</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(MiAaPQ)50030663105</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(Au-PeEL)EBL30663105</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(OCoLC)1392082158</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">MiAaPQ</subfield><subfield code="b">eng</subfield><subfield code="e">rda</subfield><subfield code="e">pn</subfield><subfield code="c">MiAaPQ</subfield><subfield code="d">MiAaPQ</subfield></datafield><datafield tag="050" ind1=" " ind2="4"><subfield code="a">T174.7</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Duan, Wenhui.</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Nanotechnology in Construction for Circular Economy :</subfield><subfield code="b">Proceedings of NICOM7, 31 October-02 November, 2022, Melbourne, Australia.</subfield></datafield><datafield tag="250" ind1=" " ind2=" "><subfield code="a">1st ed.</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="a">Singapore :</subfield><subfield code="b">Springer,</subfield><subfield code="c">2023.</subfield></datafield><datafield tag="264" ind1=" " ind2="4"><subfield code="c">©2023.</subfield></datafield><datafield tag="300" ind1=" " ind2=" "><subfield code="a">1 online resource (525 pages)</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">computer</subfield><subfield code="b">c</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">online resource</subfield><subfield code="b">cr</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="490" ind1="1" ind2=" "><subfield code="a">Lecture Notes in Civil Engineering Series ;</subfield><subfield code="v">v.356</subfield></datafield><datafield tag="505" ind1="0" ind2=" "><subfield code="a">Intro -- Organization -- NICOM7 Preface -- Contents -- Nonlinear Wind-Induced Vibration Behaviors of Multi-tower Suspension Bridges Under Strong Wind Conditions -- 1 Introduction -- 2 NAFM of Bridges -- 2.1 Three-Tower Suspension Bridge -- 2.2 2D Displacement Responses of the Closed-Box Girder -- 3 Nonlinear Flutter and Post-Flutter Behaviors of a Multi-tower Bridge -- 3.1 Turbulence Flow at Bridge Site -- 3.2 Flutter and Post-Flutter Behaviors Under Uniform Flow -- 3.3 Displacement Responses and Failure Modes Under Turbulent Flow -- 3.4 Comparison of Displacement Responses -- 4 Concluding Remarks -- References -- Thermal Transfer Effects of CRTS II Slab Track Under Various Meteorological Conditions -- 1 Introduction -- 2 Meteorological Parameter Collection -- 3 Heart Transfer Model -- 4 Conclusions -- References -- Investigation on Superhydrophobicity and Piezoresistivity of Self-sensing Cement-Based Sensors Using Silane Surface Treatment -- 1 Introduction -- 2 Methods -- 3 Results and Discussion -- 3.1 Hydrophobic Behavior -- 3.2 Piezoresistivity -- 4 Conclusions -- References -- Use of Brown Coal Ash as a Replacement of Cement in Concrete Masonry Bricks -- Composition of Alkali-Silica Reaction Products in Laboratory and Field Concrete -- 1 Introduction -- 2 Methods -- 2.1 ASR Testing as Per AMBT and SPSM -- 2.2 Analysis of the Composition of the ASR Products -- 3 Results and Discussion -- 4 Conclusions -- References -- Behavior of Hybrid Engineered Cementitious Composites Containing Nanocellulose -- 1 Introduction -- 2 Specimen Preparation -- 3 Results of Uniaxial Compression Test -- 4 Conclusions -- References -- Investigation of ASR Effects on the Load-Carrying Capacity of Reinforced Concrete Elements by Ultra-Accelerated Laboratory Test -- 1 Introduction -- 2 Methods -- 2.1 Materials and Mix Proportions.</subfield></datafield><datafield tag="505" ind1="8" ind2=" "><subfield code="a">2.2 Specimen Fabrication and Steam-Curing Procedure -- 2.3 Expansion Measurements -- 2.4 Mechanical Property Testing -- 2.5 Load Carrying Capacity Testing Under Four-Point Loading -- 3 Results and Discussion -- 3.1 Cracking of Specimens -- 3.2 Expansion of Concrete Prisms -- 3.3 Mechanical Properties of Concrete Under Accelerated ASR Test Conditions -- 3.4 Load Carrying Capacity of Reinforced Concrete Beams -- 4 Conclusions -- References -- 3D printed Ultra-High Performance Concrete: Preparation, Application, and Challenges -- 1 Introduction -- 2 Preparation of 3DP-UHPC -- 2.1 Design of UHPC for 3DCP -- 2.2 Manufacturing of 3DP-UHPC -- 2.3 Mechanical Anisotropy of 3DP-UHPC -- 3 Applications of 3DP-UHPC -- 3.1 Large-Scale Special Components -- 3.2 As the Reinforcement Materials -- 3.3 As Protection Against Explosion and Impact -- 4 Challenges of 3DP-UHPC -- 4.1 Standardization of Materials -- 4.2 Flexible Design of Structures -- 5 Summary and Outlook -- References -- Nanosilica-Modified Hydrogels Encapsulating Bacterial Spores for Self-healing Concrete -- 1 Introduction -- 2 Methods -- 2.1 Preparation of Bacterial Spores -- 2.2 Preparation of Hydrogels Encapsulating Bacterial Spores -- 2.3 Observation of Interface Between Hydrogel and Cement Matrix -- 2.4 Revival of Bacterial Spores Encapsulated in Hydrogels After Exposure to Alkali Environments -- 3 Results and Discussion -- 4 Conclusions -- References -- Reusing Alum Sludge as Cement Replacement to Develop Eco-Friendly Concrete Products -- 1 Introduction -- 2 Methodology -- 2.1 Materials -- 2.2 Sample Preparation -- 2.3 Experimental Methods -- 3 Results and Discussion -- 3.1 Material Characterization -- 3.2 Reaction Degree and Hydration Mechanism of Sludge -- 3.3 Chemo-Mechanical Properties of Pastes and Strength of Blocks -- 4 Conclusions -- References.</subfield></datafield><datafield tag="505" ind1="8" ind2=" "><subfield code="a">Role of Aggregate Reactivity, Binder Composition, and Curing Temperature on the Delayed Ettringite Formation and Associated Durability Loss in Concrete -- 1 Introduction -- 1.1 Project Outline -- 2 Methods -- 3 Results and Discussion -- 3.1 DEF in Concrete -- 3.2 ASR-DEF in Concrete -- 4 Conclusions -- References -- Effect of Blending Alum Sludge and Ground Granulated Blast-Furnace Slag as Cement Replacement to Mitigate Alkali-Silica Reaction -- 1 Introduction -- 2 Methods -- 2.1 Materials -- 2.2 Experimental Protocol -- 3 Results and Discussion -- 3.1 Compressive Strength -- 3.2 ASR-Induced Expansion -- 3.3 Phase Analysis of the Mortars -- 3.4 Microstructural Characteristics and Elemental Analysis -- 4 Conclusions -- References -- Optimisation of Limestone Calcined Clay Cement Based on Response Surface Method -- 1 Introduction -- 2 Methods -- 2.1 Materials -- 2.2 Design of Mixtures -- 3 Mathematical Modelling and Statistical Analysis -- 3.1 ANOVA and Adequacy Checking -- 3.2 Interaction Effects on Response -- 3.3 Response Surface Optimization Analysis -- 4 Conclusion -- References -- Designing Waterborne Protective Coatings Through Manipulating the Nanostructure of Acrylic-Based Nanocomposites -- 1 Introduction -- 2 Methods -- 2.1 Materials -- 2.2 Preparation of Waterborne Acrylic Copolymer, Acrylic-Based Coatings and Coating Films -- 2.3 Characterization -- 3 Results and Discussion -- 3.1 Enhanced UV Protection Through the Formation of an Acrylic-Based Nanocomposite -- 3.2 Enhanced Corrosion Resistance of Acrylic-Alkyd Coating with Worm-Like Nanostructure -- 3.3 Multifunctional Acrylic-PDMS Coating with Spherical-Like Nanostructure -- 4 Conclusion -- 5 Data Availability Statement -- References -- Analysis of Categories That Delay Global Construction Projects -- 1 Introduction -- 2 Literature Review -- 3 Research Method.</subfield></datafield><datafield tag="505" ind1="8" ind2=" "><subfield code="a">3.1 Research Scope and Select Studies -- 3.2 Factors Identified and Classification into Categories -- 3.3 Analysis of Factor Categories -- 4 Results and Discussion -- 5 Conclusion -- References -- Chloride Penetration in Low-Carbon Concrete with High Volume of SCM: A Review Study -- 1 Introduction -- 2 Chloride Penetration in LCC -- 2.1 Effect of SCM Content on Diffusion Coefficients -- 2.2 Effect of Curing Conditions on Chloride Penetration -- 2.3 Effect of Test Methods on Chloride Penetration -- 3 Conclusions -- References -- A Compact Review on the Waste-Based Lightweight Concrete: Advancement and Possibilities -- 1 Introduction -- 2 Lightweight Aggregate Concrete (LWAC) -- 3 Structural Bond Behavior of LWC -- 4 State of the Art -- 5 Possibilities -- 6 Conclusions -- References -- Influence of Reinforcement on the Loading Capacity of Geopolymer Concrete Pipe -- 1 Introduction -- 2 FE Modelling of TEB Test -- 3 Material Modelling -- 4 Load-Deflection Behavior of Concrete Pipes -- 5 Effect of Change in Reinforcement Area -- 6 Conclusion -- References -- Creep of Slag Blended Cement Concrete with and Without Activator -- 1 Introduction -- 2 Experiments -- 2.1 Mixture Proportions and Properties -- 2.2 Creep Test Setup -- 3 Creep Model in AS3600:2018 -- 4 Results and Discussion -- 4.1 Total Deformation -- 4.2 Creep Strain Measurement and Model Prediction -- 5 Conclusions -- References -- Partially-Unzipped Carbon Nanotubes as Low-Concentration Amendment for Cement Paste -- 1 Introduction -- 2 Methods -- 2.1 PUCNT Aqueous Suspensions -- 2.2 Cement Paste Specimens -- 2.3 Procedure -- 3 Results and Discussion -- 3.1 Dispersibility in Aqueous Suspension -- 3.2 Compressive Strength -- 4 Conclusions -- References -- Effect of Fine Aggregates and Test Settings on the Self-sensing Response of Cement-Based Composites with Carbon Nanotubes as Conductive Filler.</subfield></datafield><datafield tag="505" ind1="8" ind2=" "><subfield code="a">1 Introduction -- 2 Methods -- 2.1 Materials and Sample Preparation -- 2.2 Self-sensing Test -- 3 Results and Discussion -- 3.1 Materials Characterization -- 3.2 Effect of Fine Aggregate and CNT Content on Electrical and Piezoresistive Properties -- 3.3 Effect of Test Setup on Electrical and Piezoresistive Properties -- 4 Conclusions -- References -- Effect of Carbonation on the Microstructure and Phase Development of High-Slag Binders -- 1 Introduction -- 2 Methods -- 2.1 Raw Materials -- 2.2 Carbonation Test -- 2.3 Characterization of the Mortars -- 3 Results and Discussion -- 4 Conclusions -- References -- A New Dispersion Strategy to Achieve High Performance Graphene-Based Cement Material -- 1 Introduction -- 2 Methods -- 2.1 Materials -- 2.2 Sample Preparation -- 2.3 Experimental Methods -- 3 Results and Discussion -- 3.1 Characterization of GC Material -- 3.2 Mechanical Properties of GC Material -- 3.3 Dispersion Effect -- 4 Conclusions -- References -- Accelerated Mortar Bar Test to Assess the Effect of Alkali Concentration on the Alkali-Silica Reaction -- 1 Introduction -- 2 Methods -- 3 Results and Discussion -- 4 Conclusions -- References -- Development of High-Strength Light-Weight Cementitious Composites with Hollow Glass Microspheres -- 1 Introduction -- 2 Methods -- 2.1 Raw Materials -- 2.2 Mix Proportions -- 2.3 Experimental Methods -- 3 Results and Discussion -- 3.1 Density, Strength and Structural Efficiency -- 3.2 SEM Analysis -- 4 Conclusions -- References -- Co-effects of Graphene Oxide and Silica Fume on the Rheological Properties of Cement Paste -- 1 Introduction -- 2 Methods -- 2.1 Materials -- 2.2 Preparation of GO-Coated SF and Cement Paste -- 2.3 Testing Methods -- 3 Results and Discussion -- 3.1 Evaluation of the Surface Properties of MSF Particles and the MSF@GO -- 3.2 Rheological Properties -- 4 Conclusions -- References.</subfield></datafield><datafield tag="505" ind1="8" ind2=" "><subfield code="a">Automated 3D-Printer Maintenance and Part Removal by Robotic Arms.</subfield></datafield><datafield tag="588" ind1=" " ind2=" "><subfield code="a">Description based on publisher supplied metadata and other sources.</subfield></datafield><datafield tag="590" ind1=" " ind2=" "><subfield code="a">Electronic reproduction. Ann Arbor, Michigan : ProQuest Ebook Central, 2024. Available via World Wide Web. Access may be limited to ProQuest Ebook Central affiliated libraries. </subfield></datafield><datafield tag="655" ind1=" " ind2="4"><subfield code="a">Electronic books.</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Zhang, Lihai.</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Shah, Surendra P.</subfield></datafield><datafield tag="776" ind1="0" ind2="8"><subfield code="i">Print version:</subfield><subfield code="a">Duan, Wenhui</subfield><subfield code="t">Nanotechnology in Construction for Circular Economy</subfield><subfield code="d">Singapore : Springer,c2023</subfield><subfield code="z">9789819933297</subfield></datafield><datafield tag="797" ind1="2" ind2=" "><subfield code="a">ProQuest (Firm)</subfield></datafield><datafield tag="830" ind1=" " ind2="0"><subfield code="a">Lecture Notes in Civil Engineering Series</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://ebookcentral.proquest.com/lib/oeawat/detail.action?docID=30663105</subfield><subfield code="z">Click to View</subfield></datafield></record></collection> |