Hammer
![A modern [[claw hammer](https://upload.wikimedia.org/wikipedia/commons/8/84/Claw-hammer.jpg)
Hammering is use of a hammer in its strike capacity, as opposed to prying with a secondary claw or grappling with a secondary hook. Carpentry and blacksmithing hammers are generally wielded from a stationary stance against a stationary target as gripped and propelled with one arm, in a lengthy downward planar arc—downward to add kinetic energy to the impact—pivoting mainly around the shoulder and elbow, with a small but brisk wrist rotation shortly before impact; for extreme impact, concurrent motions of the torso and knee can lower the shoulder joint during the swing to further increase the length of the swing arc (but this is tiring). War hammers are often wielded in non-vertical planes of motion, with a far greater share of energy input provided from the legs and hips, which can also include a lunging motion, especially against moving targets. Small mallets can be swung from the wrists in a smaller motion permitting a much higher cadence of repeated strikes. Use of hammers and heavy mallets for demolition must adapt the hammer stroke to the location and orientation of the target, which can necessitate a clubbing or golfing motion with a two-handed grip.
The modern hammer head is typically made of steel which has been heat treated for hardness, and the handle (also known as a haft or helve) is typically made of wood or plastic.
Ubiquitous in framing, the claw hammer has a "claw" to pull nails out of wood, and is commonly found in an inventory of household tools in North America. Other types of hammers vary in shape, size, and structure, depending on their purposes. Hammers used in many trades include sledgehammers, mallets, and ball-peen hammers. Although most hammers are hand tools, powered hammers, such as steam hammers and trip hammers, are used to deliver forces beyond the capacity of the human arm. There are over 40 different types of hammers that have many different types of uses.
For hand hammers, the grip of the shaft is an important consideration. Many forms of hammering by hand are heavy work, and perspiration can lead to slippage from the hand, turning a hammer into a dangerous or destructive uncontrolled projectile. Steel is highly elastic and transmits shock and vibration; steel is also a good conductor of heat, making it unsuitable for contact with bare skin in frigid conditions. Modern hammers with steel shafts are almost invariably clad with a synthetic polymer to improve grip, dampen vibration, and to provide thermal insulation. A suitably contoured handle is also an important aid in providing a secure grip during heavy use. Traditional wooden handles were reasonably good in all regards, but lack strength and durability compared to steel, and there are safety issues with wooden handles if the head becomes loose on the shaft.
The high elasticity of the steel head is important in energy transfer, especially when used in conjunction with an equally elastic anvil.
In terms of human physiology, many uses of the hammer involve coordinated ballistic movements under intense muscular forces which must be planned in advance at the neuromuscular level, as they occur too rapidly for conscious adjustment in flight. For this reason, accurate striking at speed requires more practice than a tapping movement to the same target area. It has been suggested that the cognitive demands for pre-planning, sequencing and accurate timing associated with the related ballistic movements of throwing, clubbing, and hammering precipitated aspects of brain evolution in early hominids. Provided by Wikipedia
301
Published: 1854
Superior document: Enthalten in Sitzungsberichte der Philosophisch-Historischen Classe der Kaiserlichen Akademie der Wissenschaften Wien, 1854 12. Band (Jahrgang 1854), 3. Heft - März, Seite 509-510
Links: Volltext
302
Published: 1851
Superior document: Enthalten in Sitzungsberichte der Philosophisch-Historischen Classe der Kaiserlichen Akademie der Wissenschaften Wien, 1851 6. Band (Jahrgang 1851), 1. Heft, Seite 3-4
Links: Volltext
303
Published: 1854
Superior document: Enthalten in Sitzungsberichte der Philosophisch-Historischen Classe der Kaiserlichen Akademie der Wissenschaften Wien, 1854 12. Band (Jahrgang 1854), 4. Heft - April, Seite 592-606
Links: Volltext
304
Published: 1983
Superior document: Corpus der mittelalterlichen Wandmalereien Österreichs Band 1
305
Published: 1929
Superior document: Erläuterungen zur Geologischen Karte der Republik Oesterreich
306
Published: 1988
Links: Inhaltsverzeichnis
307
Links: Volltext// digitalisiert von: Österreichische Akademie der Wissenschaften, BAS:IS. Exemplar vom Archiv
308
309
Other Authors:
“...Hammer-Purgstall, Joseph von 1774-1856...”
310
Published: 1850
Superior document: Enthalten in Sitzungsberichte der Philosophisch-Historischen Classe der Kaiserlichen Akademie der Wissenschaften Wien, 1850 5. Band (Jahrgang 1850), 5. Heft (December), Seite 799-802
Links: Volltext
311
Published: [2020]
Superior document: Blackwell companions to philosophy ; 71
Links: Get full text
312
Published: 2013.
Links: Get full text
313
Published: [1820]
314
Published: 2004
315
Published: [1820?]
316
Published: [1820?]
317
Published: 2009
Links: Inhaltsverzeichnis
318
Published: [1820?]
319
Published: [1820]
320
Published: 1924
Superior document: Erläuterungen zur Geologischen Karte der Republik Oesterreich